|
MSP430F169 Board with Graphic LCD, SD/MMC, Joystick, JTAG
... , and includes an 84x48-pixel graphic LCD, an SD/MMC media slot, four-direction joystick, JTAG programming connector, and extension headers for all the MCU pins.
MSP430F169 Processor Board Features
- MSP430F169 ... directions and pushbutton function
- SD/MMC connector
- Two LEDs: status and power
- RESET switch
- MSP430 JTAG connector
- 32.768 kHz crystal oscillator
- 8 MHz crystal oscillator
- Power supply voltage regulators and ...
|
|
USD 46.13
The MicroController and Embedded System Store
 |
|
MSP430F169 Board, 2x16 LCD, JTAG, RS232, Mic & Audio In/Out
... on A6, A7 (DAC outputs)
- Stereo Speaker amplifier with separate volume controls L-R
- MSP JTAG connector
- RS232 connector
- RS232 interface circuit with Tx, Rx signals
- SPI port connector
- Dallas touchbutton ...
|
|
USD 111.93
The MicroController and Embedded System Store
|
|
MSP430F169 Evaluation Board, RS232, JTAG, BSL
... AA or AAA battery)
- CR2032 coin cell supply and optional 3.3v capacitive charge pump
- JTAG header
- Bootload header
- 4 User LEDs
- 2 User switches
- Every MSP port pin exposed at ... )
- Block Diagram (PDF file, 10K)
Available Programmers/Debuggers The MSP430 series has standard connectors for JTAG and Bootloader functions, so there are several options available to you for programming the MCU ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F169 Header Board, JTAG
... MCU with 60 kBytes Program Flash, 256 Bytes data Flash, 2 kBytes RAM
- MSP430-JTAG connector (top)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- Socket for optional high-frequency ... ensure that this circuit doesn't draw more than a few milliamperes, due to the JTAG port current limitations. Power_In is useful to program your board when it is used standalone ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F169 IrDA Evaluation Board, RS232, JTAG
... Note SLAA202.
MSP430F169 IrDA Evaluation Board Features
- MSP430F169 Flash processor
- Dual alkaline power supply
- JTAG header
- 2 User LEDs
- 2 User switches
- Available port pins exposed at IDC headers
- Microphone ... files (ZIP file, 712K)
Available Programmers/Debuggers The MSP430 series has a standard connector for JTAG functions, so there are several other options available to you for programming the MCU on ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F2131 DIP Module, JTAG
... module can be programmed and debugged in-circuit via its JTAG Flexible Printed Circuit interface. MSP430F2131 Breadboard Module Features
- MSP430F2131 Flash processor
- JTAG Flexible Printed Circuit interface (JFPC) socket for in-circuit ... . To adapt this board's FPC connector to the standard 14-pin JTAG connector, you will require an FPC-to-JTAG adapter. With that adapter, there are several options available to you ...
|
|
The MicroController and Embedded System Store
|
|
|
|
MSP430F2131 Header Board, JTAG
... 15.24 mm (0.6")
- TI MSP-FET compatible 2x7 pin JTAG connector (top view, connector on PCB)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- TEST pin pull ... ensure that this circuit doesn't draw more than a few milliampers, due to the JTAG port current limitations. Power_In is useful to program the board when it is used standalone ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F413 Board, Water Meter LCD, RS232, JTAG, Buzzer
...
- MSP430F413 MCU with 8 kBytes Program Flash, 256 Bytes data Flash, 256 Bytes RAM
- MSP JTAG connector
- Custom LCD panel with 5 digits, 5 decimal counters, special signs
- RS232 connector
- RS232 ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F413 Header Board, JTAG, 8kB Flash, 256B RAM & Data Flash
... MCU with 8 kBytes Program Flash, 256 Bytes data Flash, 256 Bytes RAM
- MSP430-JTAG connector (top)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- Socket for optional high-frequency ... ensure that this circuit doesn't draw more than a few milliamperes, due to the JTAG port current limitations. Power_In is useful to program your board when it is used standalone ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F417 Board, Water Meter LCD, RS232, JTAG, Buzzer
...
- MSP430F417 MCU with 32 kBytes Program Flash, 256 Bytes data Flash, 1 kBytes RAM
- MSP JTAG connector
- Custom LCD panel with 5 digits, 5 decimal counters, special signs
- RS232 connector
- RS232 ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F417 Header Board, JTAG, 32kB Flash, 256B Data Flash
... MCU with 32 kBytes Program Flash, 256 Bytes data Flash, 2 kBytes RAM
- MSP430-JTAG connector (top)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- Socket for optional high-frequency ... ensure that this circuit doesn't draw more than a few milliamperes, due to the JTAG port current limitations. Power_In is useful to program your board when it is used standalone ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F449 Board, LCD, JTAG, Buzzer, RS232
... an in-circuit debugging platform for your own code developement by using the optional MSP-JTAG cable.
The board ships completely assembled and tested. TI MSP430 Board Features
- MCU: MSP430F449 with 60k Bytes Program Flash, 256 Bytes Data Flash, 2k Bytes RAM
- 2x7 pin JTAG connector (top view, connector on PCB)
- RS232 connector
- RS232 interface circuit with Tx, Rx signals ...
|
|
The MicroController and Embedded System Store
|
|
|
|
MSP430F449 Header Board, JTAG, 60kB Flash, 256B Data Flash
... Header board with Texas Instruments MSP430F449 microcontroller; JTAG in-circuit debugging and programming port; and extension header connectors providing easy access to every ... mm (0.062"), green soldermask, white silkscreen component print
- 2x7 pin JTAG connector (top view, connector on PCB)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz crystal oscillator
- 8 MHz crystal ...
|
|
The MicroController and Embedded System Store
|
|
MSP430FE427 Header Board, JTAG, 32kB Flash, 256B Data Flash
... MCU with 32 kBytes Program Flash, 256 Bytes data Flash, 1 kByte RAM
- MSP430-JTAG connector (top)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- Socket for optional high-frequency ... ensure that this circuit doesn't draw more than a few milliamperes, due to the JTAG port current limitations. Power_In is useful to program your board when it is used standalone ...
|
|
The MicroController and Embedded System Store
|
|
MSP430FG439 Header Board, JTAG, 60kB Flash, 2kB RAM
... MCU with 60 kBytes Program Flash, 256 Bytes data Flash, 2 kBytes RAM
- MSP430-JTAG connector (top)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- Socket for optional high-frequency ... ensure that this circuit doesn't draw more than a few milliamperes, due to the JTAG port current limitations. Power_In is useful to program your board when it is used standalone ...
|
|
The MicroController and Embedded System Store
|
|
MSP430FW427 Header Board, JTAG, 32kB Flash, 1kB RAM
... MCU with 32 kBytes Program Flash, 256 Bytes data Flash, 1 kByte RAM
- MSP430-JTAG connector (top)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- Socket for optional high-frequency ... ensure that this circuit doesn't draw more than a few milliamperes, due to the JTAG port current limitations. Power_In is useful to program your board when it is used standalone ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F1121 Development Board, JTAG, RS232, 4Kb Flash, 256B RAM
...
- MSP430F1121A MCU with 4 kBytes Program Flash, 256 Bytes data Flash, 256 Bytes RAM
- MSP JTAG connector
- RS232 connector
- RS232 interface circuit with Tx, Rx signals
- Dallas touchbutton port
- Frequency input ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F1121 DIP Module, JTAG
... Features
- MSP430F1121 Flash processor
- TPS3838 supply voltage supervisor
- External reset via SVS manual reset option
- JTAG Flexible Printed Circuit interface (JFPC) socket for in-circuit programming and debugging
- 32 kHz crystal ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F1121 Prototype Board, JTAG
... MCU with 4 kBytes Program Flash, 256 Bytes data Flash, 256 Bytes RAM
- MSP430-JTAG connector (top)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- TEST pin pull-down
- RST ... ensure that this circuit doesn't draw more than a few milliamperes, due to the JTAG port current limitations. Power_In is useful to program your board when it is used standalone ...
|
|
USD 16.73
The MicroController and Embedded System Store
|
|
MSP430F1121A Evaluation Board, RS232, JTAG, BSL
... AA or AAA battery)
- CR2032 coin cell supply and optional 3.3V capacitive charge pump
- JTAG header
- Bootload header
- 4 User LEDs
- 2 User switches
- Every MSP port pin exposed at ... Code Protection by Security Fuse
Available Programmers/Debuggers The MSP430 series has standard connectors for JTAG and Bootloader functions, so there are several options available to you for programming the MCU ...
|
|
USD 199.00
The MicroController and Embedded System Store
|
|
|
|
