|
NXP LPC2148/2214 Header Board for EasyARM System
... four 2×18 male connectors. In-circuit programming/debugging is possible through the on-board JTAG header. The bottom layer of these boards has a ground plane for noise prevention.
You can ...
|
|
USD 44.00
MicroController & Embedded Systems Too ...
  |
|
NXP LPC2148/2214 Header Board for EasyARM System
... four 2×18 male connectors. In-circuit programming/debugging is possible through the on-board JTAG header. The bottom layer of these boards has a ground plane for noise prevention.
You can ...
|
|
USD 44.00
The MicroController and Embedded System Store
|
|
XDS560 High Performance JTAG Emulator for TI Processors
... -pin standard JTAG header
- Full compatibility with TI XDS560 Emulator
- Operating systems: Windows XP, Vista
- Supported by Code Composer Studio V3.1 and higher Benefits
- The most cost-effective XDS560 compatible JTAG Emulator ...
|
|
USD 1,080.00
MicroController & Embedded Systems Too ...
|
|
XDS560 High Performance JTAG Emulator for TI Processors, w/ CCS4
... -pin standard JTAG header
- Full compatibility with TI XDS560 Emulator
- Operating systems: Windows XP, Vista
- Supported by Code Composer Studio V3.1 and higher Benefits
- The most cost-effective XDS560 compatible JTAG Emulator ...
|
|
USD 1,500.00
MicroController & Embedded Systems Too ...
|
|
Atmel ATmega128A Header or Breakout Board, JTAG, ISP, 64-pin DIP
... provides a simple way to use the SMD ATmega128A microcontroller from Atmel.
Note that the header pins are provided loose; you can solder them facing up as pictured or facing down ... mounted on a prototyping PCB or in a socket.
This board has an ISP header and a JTAG header for in-circuit programming/debugging. It can be powered by 2.7V to 5V ...
|
|
MicroController & Embedded Systems Too ...
|
|
XDS560 High Performance JTAG Emulator for TI Processors
... -pin standard JTAG header
- Full compatibility with TI XDS560 Emulator
- Operating systems: Windows XP, Vista
- Supported by Code Composer Studio V3.1 and higher Benefits
- The most cost-effective XDS560 compatible JTAG Emulator ...
|
|
USD 1,080.00
The MicroController and Embedded System Store
|
|
|
|
XDS560 High Performance JTAG Emulator for TI Processors, w/ CCS4
... -pin standard JTAG header
- Full compatibility with TI XDS560 Emulator
- Operating systems: Windows XP, Vista
- Supported by Code Composer Studio V3.1 and higher Benefits
- The most cost-effective XDS560 compatible JTAG Emulator ...
|
|
USD 1,500.00
The MicroController and Embedded System Store
|
|
Atmel ATmega128A Header or Breakout Board, JTAG, ISP, 64-pin DIP
... provides a simple way to use the SMD ATmega128A microcontroller from Atmel.
Note that the header pins are provided loose; you can solder them facing up as pictured or facing down ... mounted on a prototyping PCB or in a socket.
This board has an ISP header and a JTAG header for in-circuit programming/debugging. It can be powered by 2.7V to 5V ...
|
|
The MicroController and Embedded System Store
|
|
GOPLCP GOP JTAG adaptor
... to the Xilinx Parallel Cable III. Features
- JTAG adaptor for PC parallel port
- Compatible with Xilinx parallel cable III
- Standard Xilinx 14-pin JTAG header
- Robust transfer due to Schmitt-Trigger inputs on parallel port
- 100% compatible with Xilinx ISE software Specifications
- CPLD / FPGA JTAG adaptor with 2mm / 14-pin IDC header
- Supply 2 ...
|
|
Trenz electronic GmbH - Online Shop
|
|
10-pin Needle Adapter for ARM JTAG Programmer/Debuggers
... only this footprint, saving board space and material costs otherwise spent on including a programming header. The footprint pattern has three locating pins which ensure that the adapter only can be ... JTAG connector to a 10-pin needle connector.
J-Link Needle Adapter Features
- Save production cost: No connector required on your PCB
- Save board space: Much smaller footprint than a traditional JTAG header ...
|
|
The MicroController and Embedded System Store
|
|
10-pin Needle Adapter for ARM JTAG Programmer/Debuggers
... only this footprint, saving board space and material costs otherwise spent on including a programming header. The footprint pattern has three locating pins which ensure that the adapter only can be ... JTAG connector to a 10-pin needle connector.
J-Link Needle Adapter Features
- Save production cost: No connector required on your PCB
- Save board space: Much smaller footprint than a traditional JTAG header ...
|
|
MicroController & Embedded Systems Too ...
|
|
MSP430FR5739 Header Board, JTAG, UEXT
... processor by Texas Instruments. There is a JTAG header on the board for easy programming, and a UEXT connector for plugging in peripheral modules.
MSP430FR5739 Header Board Features
- MSP430FR5739 CPU has 16K Bytes ...
- RST/NMI pin pull-up
- Power supply filtering capacitor and 3.3V voltage regulator
- Extension headers for each MCU pin
- UEXT connector (see below)
- PCB: FR-4, 1.5 mm (0 ...
|
|
The MicroController and Embedded System Store
|
|
|
|
MSP430FR5739 Header Board, JTAG, UEXT
... processor by Texas Instruments. There is a JTAG header on the board for easy programming, and a UEXT connector for plugging in peripheral modules.
MSP430FR5739 Header Board Features
- MSP430FR5739 CPU has 16K Bytes ...
- RST/NMI pin pull-up
- Power supply filtering capacitor and 3.3V voltage regulator
- Extension headers for each MCU pin
- UEXT connector (see below)
- PCB: FR-4, 1.5 mm (0 ...
|
|
MicroController & Embedded Systems Too ...
|
|
PEEDI Blackfin JTAG In-Circuit Debugger/Programmer, GDB
... : 270 g
- I/O Ports: 2x10 JTAG/BDM Header, RJ45 for RS232
- Buttons: Two on front panel, Reset on back panel Additional Licenses
The PEEDI Blackfin JTAG In-Circuit Debugger/Programmer can also ... Emulator.
- For ARM7 and ARM9 CPU support, purchase the ARM7, ARM9 CPU Support for PEEDI JTAG Emulator.
Blackfin In-Circuit Debugger Resources
- Download brochure, manuals, configuration files and firmware updates
- Application ...
|
|
USD 2,050.00
The MicroController and Embedded System Store
|
|
JTAG Programming Cable
DB-25 parallel port connector to 6-pin female header connector.
Low cost JTAG configuration solution applicable to any JTAG-programmable device (FGPA, CPLD, Flash, etc..).
The 6pin standard pinout is compatible with ... conductors for each JTAG signal.
Specification
- Connects directly to the parallel port of a PC, and to a standard 6-pin JTAG programming header
- Can program devices that have a JTAG voltage of 1 ...
|
|
Trenz electronic GmbH - Online Shop
|
|
PEEDI Blackfin JTAG In-Circuit Debugger/Programmer, GDB
... : 270 g
- I/O Ports: 2x10 JTAG/BDM Header, RJ45 for RS232
- Buttons: Two on front panel, Reset on back panel Additional Licenses
The PEEDI Blackfin JTAG In-Circuit Debugger/Programmer can also ... Emulator.
- For ARM7 and ARM9 CPU support, purchase the ARM7, ARM9 CPU Support for PEEDI JTAG Emulator.
Blackfin In-Circuit Debugger Resources
- Download brochure, manuals, configuration files and firmware updates
- Application ...
|
|
USD 2,050.00
MicroController & Embedded Systems Too ...
|
|
MSP430F1611 Header Board, JTAG
MSP430F1611 Header Board Features
- MSP430F1611 with 48 kBytes Program Flash, 256 Bytes data Flash, 10 kBytes RAM
- MSP430-JTAG connector (top)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- Socket for ... the MSP430F1611 board to the JTAG connector. When this jumper is placed, the power supply of the JTAG debugger/programmer will follow the power supply of the header board. This is useful when ...
|
|
MicroController & Embedded Systems Too ...
|
|
MSP430F169 Board with Graphic LCD, SD/MMC, Joystick, JTAG
... an 84x48-pixel graphic LCD, an SD/MMC media slot, four-direction joystick, JTAG programming connector, and extension headers for all the MCU pins.
MSP430F169 Processor Board Features
- MSP430F169 with 60 kBytes ... : status and power
- RESET switch
- MSP430 JTAG connector
- 32.768 kHz crystal oscillator
- 8 MHz crystal oscillator
- Power supply voltage regulators and filtering capacitor
- Extension headers for all MCU pins
- PCB: FR ...
|
|
USD 46.13
MicroController & Embedded Systems Too ...
|
|
MSP430F169 Board, 2x16 LCD, JTAG, RS232, Mic & Audio In/Out
... Stereo Speaker amplifier with separate volume controls L-R
- MSP JTAG connector
- RS232 connector
- RS232 interface circuit with Tx, Rx ... jack for input voltage 7.5-9V DC
- Extension headers for the free uC pins
- PCB: FR-4, 1 ...
|
|
USD 111.93
MicroController & Embedded Systems Too ...
|
|
|
|
