|
J-Link ULTRA JTAG/SWD Debugger/Programmer with J-Flash Software
... for adaptive clocking
- All JTAG signals can be monitored; target voltage can be measured
- Support for multiple devices
- Fully plug-and-play compatible
- Standard 20-pin JTAG connector
- Wide target voltage range: 1 ... systems which enables you to program your Flash EEPROM devices via the On-Chip Debug connector (JTAG) on your target system, when used with the J-Link.
J-Flash works with any ...
|
|
The MicroController and Embedded System Store
 |
|
J-Link ULTRA JTAG/SWD Debugger/Programmer with RDI Support
... 2003, Windows Vista or Windows 7. J-Link Ultra has a built-in 20-pin JTAG/SWD connector.
J-Link ULTRA Features
- Supported CPUs: Any ARM7, ARM9, ARM11, Cortex-A5, Cortex-A8 ... for adaptive clocking
- All JTAG signals can be monitored; target voltage can be measured
- Support for multiple devices
- Fully plug-and-play compatible
- Standard 20-pin JTAG connector
- Wide target voltage range: 1 ...
|
|
The MicroController and Embedded System Store
|
|
J-Link ULTRA Pro Bundle: JTAG/SWD Debugger/Programmer, Software
... for adaptive clocking
- All JTAG signals can be monitored; target voltage can be measured
- Support for multiple devices
- Fully plug-and-play compatible
- Standard 20-pin JTAG connector
- Wide target voltage range: 1 ... systems which enables you to program your Flash EEPROM devices via the On-Chip Debug connector (JTAG) on your target system, when used with the J-Link.
J-Flash works with any ...
|
|
The MicroController and Embedded System Store
|
|
20-pin Standard to TI CTI-20 Adapter for ARM JTAG Programmers
... designed to connect from the standard ARM 20-pin 0.1" target JTAG connector to a TI CTI-20 connector. This adapter permits the connection of programmers such as J-Link/J ... to evaluation boards that have TI MCUs and are equipped with a TI CTI-20 connector, e.g. the AM335x evaluation module. The adapter is keyed so that it cannot be ...
|
|
The MicroController and Embedded System Store
|
|
MSP430 Handheld Opto-Isolated JTAG Programmer/Debugger, USB, LCD
...
- Uses TI standard 2×7-pin JTAG connector
- Spy-Bi-Wire support for the newest TI MSP430 devices
- 14-pin ribbon cable included
- Can blow the MSP430 JTAG security fuse
- Opto-isolation 1000V ... for improper use of this product.
MSP430 Hand-Held Programmer/Debugger Resources
- MSP430-JTAG-ISO-MK2 User Manual
- MSP430-JTAG-ISO-MK2 Drivers (including FTDI drivers)
- MSP430-Programmer Software from Olimex
- FET ...
|
|
The MicroController and Embedded System Store
|
|
MSP430F5510 Board for Breadboard Development, USB, UEXT, JTAG
... Flash, 4K Bytes RAM, 25 MHz
- mini-USB connector
- User button
- RESET and BOOT buttons
- 14-pin MSP430 JTAG connector (e.g. for MSP430-JTAG-TINY)
- UEXT connector plug-in peripherals (see below)
- T-shape ... UEXT port.
Powering the Board The board can be powered via the mini-USB connector, from the JTAG/SBW interface, or through the VIN and +5V pins which will go through your ...
|
|
The MicroController and Embedded System Store
|
|
|
|
MSP430F5510 Board with Arduino & UEXT Connectors, mini-USB
...
- mini-USB connector
- Arduino Shield connectors
- UEXT connector
- JST 2.0mm LiPo connector and battery charger
- User button
- RESET and BSL buttons
- 14-pin MSP430 JTAG connector (e.g. for MSP430-JTAG-TINY)
- Four ...
|
|
The MicroController and Embedded System Store
|
|
20-pin Standard to TI CTI-20 Adapter for ARM JTAG Programmers
... designed to connect from the standard ARM 20-pin 0.1" target JTAG connector to a TI CTI-20 connector. This adapter permits the connection of programmers such as J-Link/J ... to evaluation boards that have TI MCUs and are equipped with a TI CTI-20 connector, e.g. the AM335x evaluation module. The adapter is keyed so that it cannot be ...
|
|
MicroController & Embedded Systems Too ...
 |
|
MSP430 Handheld Opto-Isolated JTAG Programmer/Debugger, USB, LCD
...
- Uses TI standard 2×7-pin JTAG connector
- Spy-Bi-Wire support for the newest TI MSP430 devices
- 14-pin ribbon cable included
- Can blow the MSP430 JTAG security fuse
- Opto-isolation 1000V ... for improper use of this product.
MSP430 Hand-Held Programmer/Debugger Resources
- MSP430-JTAG-ISO-MK2 User Manual
- MSP430-JTAG-ISO-MK2 Drivers (including FTDI drivers)
- MSP430-Programmer Software from Olimex
- FET ...
|
|
MicroController & Embedded Systems Too ...
|
|
MSP430F5510 Board for Breadboard Development, USB, UEXT, JTAG
... Flash, 4K Bytes RAM, 25 MHz
- mini-USB connector
- User button
- RESET and BOOT buttons
- 14-pin MSP430 JTAG connector (e.g. for MSP430-JTAG-TINY)
- UEXT connector plug-in peripherals (see below)
- T-shape ... UEXT port.
Powering the Board The board can be powered via the mini-USB connector, from the JTAG/SBW interface, or through the VIN and +5V pins which will go through your ...
|
|
MicroController & Embedded Systems Too ...
|
|
MSP430F5510 Board with Arduino & UEXT Connectors, mini-USB
...
- mini-USB connector
- Arduino Shield connectors
- UEXT connector
- JST 2.0mm LiPo connector and battery charger
- User button
- RESET and BSL buttons
- 14-pin MSP430 JTAG connector (e.g. for MSP430-JTAG-TINY)
- Four ...
|
|
MicroController & Embedded Systems Too ...
|
|
MSP430FR5739 Header Board, JTAG, UEXT
... -low-power MSP430FR5739 processor by Texas Instruments. There is a JTAG header on the board for easy programming, and a UEXT connector for plugging in peripheral modules.
MSP430FR5739 Header Board Features
- MSP430FR5739 ... multiplier, real-time clock, five 16-bit timers, and more
- 14-pin MSP430 JTAG connector for programming/debugging
- Jumpers for JTAG power enable/disable
- User LED
- Two user buttons
- 32.768 kHz oscillator ...
|
|
The MicroController and Embedded System Store
|
|
|
|
MSP430F249 Header Board, JTAG
... .5 mm (0.062"), green soldermask, white silkscreen component print
- 2x7 pin JTAG connector (top view, connector on PCB)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz crystal oscillator
- Socket for optional high ... .
The Power_Out jumper routes power from the Header board to JTAG connector. When this jumper cap is placed, the power supply of JTAG connector will follow the power supply of Header board. This is ...
|
|
The MicroController and Embedded System Store
|
|
MSP430G2231 Header Board, JTAG
... 2K Bytes Program Flash, 256 Bytes RAM
- 3.3V voltage regulator
- External power connector
- Status LED
- MSP430 JTAG connector
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- TEST pin pull-down
- RST ...
|
|
The MicroController and Embedded System Store
|
|
MSP430FR5739 Header Board, JTAG, UEXT
... -low-power MSP430FR5739 processor by Texas Instruments. There is a JTAG header on the board for easy programming, and a UEXT connector for plugging in peripheral modules.
MSP430FR5739 Header Board Features
- MSP430FR5739 ... multiplier, real-time clock, five 16-bit timers, and more
- 14-pin MSP430 JTAG connector for programming/debugging
- Jumpers for JTAG power enable/disable
- User LED
- Two user buttons
- 32.768 kHz oscillator ...
|
|
MicroController & Embedded Systems Too ...
|
|
MSP430F249 Header Board, JTAG
... .5 mm (0.062"), green soldermask, white silkscreen component print
- 2x7 pin JTAG connector (top view, connector on PCB)
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz crystal oscillator
- Socket for optional high ... .
The Power_Out jumper routes power from the Header board to JTAG connector. When this jumper cap is placed, the power supply of JTAG connector will follow the power supply of Header board. This is ...
|
|
MicroController & Embedded Systems Too ...
|
|
MSP430G2231 Header Board, JTAG
... 2K Bytes Program Flash, 256 Bytes RAM
- 3.3V voltage regulator
- External power connector
- Status LED
- MSP430 JTAG connector
- JTAG Power_In and Power_Out jumpers
- 32.768 kHz oscillator crystal
- TEST pin pull-down
- RST ...
|
|
MicroController & Embedded Systems Too ...
|
|
MSP430G2231 Prototyping Board, JTAG, 2x Buttons, 2x LEDs
... and built-in communication capability using synchronous protocols (SPI or I2C). The board has a JTAG connector, two status LEDs, two user buttons, and a prototype area where you can connect your ...
- Two user buttons
- Two status LEDs
- Power LED
- 2×7-pin MSP430 JTAG connector
- Board can be powered via JTAG or external supply (jumper selection)
- 32.768 kHz crystal oscillator
- TEST pin pull ...
|
|
The MicroController and Embedded System Store
|
|
MSP430G2231 Prototyping Board, JTAG, 2x Buttons, 2x LEDs
... and built-in communication capability using synchronous protocols (SPI or I2C). The board has a JTAG connector, two status LEDs, two user buttons, and a prototype area where you can connect your ...
- Two user buttons
- Two status LEDs
- Power LED
- 2×7-pin MSP430 JTAG connector
- Board can be powered via JTAG or external supply (jumper selection)
- 32.768 kHz crystal oscillator
- TEST pin pull ...
|
|
MicroController & Embedded Systems Too ...
|
|
|
|
