|
LED Control board (Brelec)
Lighting controller board as used with the Brelec LED light bar
50ma Antiflicker light board, will control upto 6 LEDS
Power supply, anti-flicker and dimmer control for the bulk light bar kit.
Anti-flicker
Built ...
|
|
USD 6.02
GBP 3.66
DCC Supplies
|
|
Eagle Diamond Control Board
... Every Eagle Operator ships with the new Diamond Control Board. This board has many unique and advanced features, and they all ... :
- 2 Wire Master Slave connection system, you can even use non-shielded wire.
- Two 120 VAC Power Outlets for the ...
Details...
|
|
USD 475.00
Texas Security Gates - traffic controllers ...
|
|
E-Blocks Dual Bridge Driver Motor Control Board
... Driver Board allows the user to connect and drive two motors independently of each other. The inclusion of sense and quadrature terminals permits the user to employ feedback and positional control of ... microcontrollers are used as the preferred processor; they provide up to 5 E-block ports with up to 8 lines per port.
Download E-Block Dual Bridge Driver Motor Control Board Datasheet (PDF ...
|
|
MicroController & Embedded Systems Too ...
  |
|
ATmega32 Motor Control Board: 2x Stepper, 4x DC Motors
... have a 2x10 or 2x6 pin ISP connector. To use such a programmer with this board, you will need an AVRISP adapter together with some prototyping ... -pin single row ISP connector (see add-on options below). ATmega32 Motor Control Board Downloads: ...
|
|
USD 51.00
MicroController & Embedded Systems Too ...
|
|
24 Digital I/O over USB Control Board
... to program using popular development languages such as C, Basic, Delphi, VB, etc.
- Simple command set for easy control of ports and data transfer Download 24 Digital I/O over USB Control Board Datasheet
|
|
USD 119.00
MicroController & Embedded Systems Too ...
|
|
dsPIC33FJ128MC802 Motor Control Board w/ Bootloader, XBee socket
... the board is powered
- L1: User defined
- L2: User defined
- ASSOC: Used by XBee if installed. Indicates XBee ready
- RSSI: Used by XBee if installed. Flashes when signal is received
dsPIC33FJ Motor Control Board Resources ...
|
|
MicroController & Embedded Systems Too ...
|
|
|
|
TouchPanel Controller Board, 4-wire FFC to 6 pins @ 0.1
... to connect the board to your system. Male header pins are provided that you can solder, for typical breadboard use.
Note: This board uses 5V power supply only.
TouchPanel Controller Board Resources
- TouchPanel Controller PROTO User ...
|
|
MicroController & Embedded Systems Too ...
|
|
E-Blocks Dual Bridge Driver Motor Control Board
... Driver Board allows the user to connect and drive two motors independently of each other. The inclusion of sense and quadrature terminals permits the user to employ feedback and positional control of ... microcontrollers are used as the preferred processor; they provide up to 5 E-block ports with up to 8 lines per port.
Download E-Block Dual Bridge Driver Motor Control Board Datasheet (PDF ...
|
|
The MicroController and Embedded System Store
|
|
ATmega32 Motor Control Board: 2x Stepper, 4x DC Motors
... have a 2x10 or 2x6 pin ISP connector. To use such a programmer with this board, you will need an AVRISP adapter together with some prototyping ... -pin single row ISP connector (see add-on options below). ATmega32 Motor Control Board Downloads: ...
|
|
USD 51.00
The MicroController and Embedded System Store
|
|
24 Digital I/O over USB Control Board
... to program using popular development languages such as C, Basic, Delphi, VB, etc.
- Simple command set for easy control of ports and data transfer Download 24 Digital I/O over USB Control Board Datasheet
|
|
USD 119.00
The MicroController and Embedded System Store
|
|
dsPIC33FJ128MC802 Motor Control Board w/ Bootloader, XBee socket
... the board is powered
- L1: User defined
- L2: User defined
- ASSOC: Used by XBee if installed. Indicates XBee ready
- RSSI: Used by XBee if installed. Flashes when signal is received
dsPIC33FJ Motor Control Board Resources ...
|
|
The MicroController and Embedded System Store
|
|
Cerebot MC7 - Advanced motor control board
... - Advanced motor control board
The Cerebot MC7 board is microcontroller development board based on a Microchip dsPIC 16-bit Digital Signal Controller. The Cerebot MC7 is primarily intended to be used as a controller for electro-mechanical ...
|
|
Trenz electronic GmbH - Online Shop
|
|
|
|
TouchPanel Controller Board, 4-wire FFC to 6 pins @ 0.1
... to connect the board to your system. Male header pins are provided that you can solder, for typical breadboard use.
Note: This board uses 5V power supply only.
TouchPanel Controller Board Resources
- TouchPanel Controller PROTO User ...
|
|
The MicroController and Embedded System Store
|
|
P89V51RD2 Motor & 6V Relay Control Board, L298, RTC, EEPROM, LCD
... Controller Board is designed for motorized prototyping and usage. The board's two L298 Dual Full Bridge Drivers provide an ... with a stable 5V supply. One regulator's output is used on the board; the other is available.
I/O pins of the P89V51RD2 ...
|
|
The MicroController and Embedded System Store
|
|
Elite Robo Control Board
Elite Circuit Board
Robo Series
Control Board
|
|
USD 425.00
Texas Security Gates - traffic controllers ...
|
|
Miracle One Control Board
New Miracle One Control Board
|
|
USD 399.00
Texas Security Gates - traffic controllers ...
|
|
2510-244 Control Board - Single Phase (Includes Motor Board)
... Single Phase Control Board for OSCO Gate Operators
This board will replace the control board in OSCO Single Phase Gate Operators.
It includes both the main control board and the piggy back motor board.
It may be necessary ...
|
|
USD 471.82
Protec Controls
|
|
2510-247 Control Board - DC (Includes DC Motor Board)
... the main control board and the piggy back motor board.
It may be necessary to install the chip from your existing control board into the new board.
***There are no returns on opened OSCO control boards***
We have ...
|
|
USD 524.64
Protec Controls
|
|
24 Digital I/O over Ethernet Control Board
... to any device which is connected to the internet. 24 Digital I/O over Ethernet Control Board Features
- Supports ARP, BOOTP, DHCP, ICMP and UDP/IP protocols
- Programmable, port number, subnet mask ...
|
|
USD 170.00
MicroController & Embedded Systems Too ...
|
|
2510-245 Control Board - DC Operators (Includes DC Motor Board)
DC Powered Control Board for OSCO Gate Operators
This board will replace the control board in OSCO DC Powered Gate Operators.
It includes both the main control board and the piggy back motor board.
It may be necessary ...
|
|
USD 524.64
Protec Controls
|
|
|
|
