WillyFogg.com - Product Search Engine Select Country Worldwide     Select Language English     Select Currency
Product Search Engine
Countries: 127
Languages: 120
Currencies: 62
Stores: 99,869
Manufacturers: 388,033
Products: 3,296,849



Simrad Transducer Adapter cable 7 pin BLUE to bare wires
Simrad Transducer Adapter cable 7 pin BLUE to bare wires
Simrad Transducer Adapter cable 7 pin BLUE to bare wires Adapter cable, 7 pin BLUE to bare wires.

Power Supply Adapter Cable, Bare Wires to 2.5/5.5mm Barrel Plug
Power Supply Adapter Cable, Bare Wires to 2.5/5.5mm Barrel Plug
... simple adapter cable from bare wires to a barrel plug connector with 2.5mm inner diameter and 5.5mm outer diameter. The wires are red and black, with the red wire connected to the ... so it corresponds to a typical positive-inner configuration. Of course you can swap the wires if you need to use it for a positive-outer configuration — you just might want ...

Power Supply Adapter Cable, Bare Wires to 2.5/5.5mm Barrel Plug
Power Supply Adapter Cable, Bare Wires to 2.5/5.5mm Barrel Plug
... simple adapter cable from bare wires to a barrel plug connector with 2.5mm inner diameter and 5.5mm outer diameter. The wires are red and black, with the red wire connected to the ... so it corresponds to a typical positive-inner configuration. Of course you can swap the wires if you need to use it for a positive-outer configuration — you just might want ...

DC Power Analyzer  bare wire
DC Power Analyzer bare wire
... meter and void your warranty. Initial Setup & Wiring The red source wire goes to the positive (+) source or battery terminal. The black source wire (-) goes to the negative terminal. Use caution when ... connections are tight use adequate wire size to handle higher amps/current. This watt meter is available with either Anderson PowerPole® connectors pre-installed or with bare wire ends for installation of your ...

USD 27.95

Radio City, Inc.

USB-to-Serial Cable: 3.3V TTL, 6 Bare Wires
USB-to-Serial Cable: 3.3V TTL, 6 Bare Wires
... is terminated at the end of a 1.8 m (70") cable with 6 bare, tinned wires which provide access to transmit (Tx), receive (Rx), RTS#, CTS#, Vcc (5V), and GND ... to the requirements of your application. Alternatively the USB to serial cable can be hard wired onto a PCB. The TTL-232R-3V3-WE is fully RoHS compliant and is supplied ...

USB-to-Serial Cable: 5V TTL, 6 Bare Wires
USB-to-Serial Cable: 5V TTL, 6 Bare Wires
... is terminated at the end of a 1.8 m (70") cable with 6 bare, tinned wires which provide access to transmit (Tx), receive (Rx), RTS#, CTS#, Vcc (5V), and GND ... to the requirements of your application. Alternatively the USB to serial cable can be hard wired onto a PCB. The TTL-232R-WE is fully RoHS compliant and is supplied loose ...

USB-to-Serial Cable: 3.3V TTL, 6 Bare Wires
USB-to-Serial Cable: 3.3V TTL, 6 Bare Wires
... is terminated at the end of a 1.8 m (70") cable with 6 bare, tinned wires which provide access to transmit (Tx), receive (Rx), RTS#, CTS#, Vcc (5V), and GND ... to the requirements of your application. Alternatively the USB to serial cable can be hard wired onto a PCB. The TTL-232R-3V3-WE is fully RoHS compliant and is supplied ...

USB-to-Serial Cable: 5V TTL, 6 Bare Wires
USB-to-Serial Cable: 5V TTL, 6 Bare Wires
... is terminated at the end of a 1.8 m (70") cable with 6 bare, tinned wires which provide access to transmit (Tx), receive (Rx), RTS#, CTS#, Vcc (5V), and GND ... to the requirements of your application. Alternatively the USB to serial cable can be hard wired onto a PCB. The TTL-232R-WE is fully RoHS compliant and is supplied loose ...

Battery Holder for 4x AA, Bare Wire Ends, Mounting Screws
Battery Holder for 4x AA, Bare Wire Ends, Mounting Screws
Install four AA batteries in this holder to source 6V DC for your device or robot motors. The wires are bare ended. Screws and nuts are included so you can mount this to a robot chassis, for example. Batteries are not included.

Battery Holder for 4x AA, Bare Wire Ends, Mounting Screws
Battery Holder for 4x AA, Bare Wire Ends, Mounting Screws
Install four AA batteries in this holder to source 6V DC for your device or robot motors. The wires are bare ended. Screws and nuts are included so you can mount this to a robot chassis, for example. Batteries are not included.

2.5mm 3-pole Audio Plug Cable with 8-inch Wires
2.5mm 3-pole Audio Plug Cable with 8-inch Wires
... plug on one side and unterminated with bare wires on the other end. These are intended to be used with the ModKit MotoProto Shield — solder the wire ends to sensors. You can use ...