|
Atmel ATmega16-16AI Board, JTAG connector, 40DIP form factor
... AVR microcontroller with 10-pin JTAG connector for in-system programming and debugging ATmega16 Board Features
- ATmega16-16AI Atmel AVR microcontroller
- Pin-to-pin compatible with 40-pin DIL AT90S8535
- AVR JTAG connector (top view on ...
|
|
MicroController & Embedded Systems Too ...
  |
|
10-pin Needle Adapter for ARM JTAG Programmer/Debuggers
... 20-pin 0.1"-pitch JTAG connector to a 10-pin needle connector.
J-Link Needle Adapter Features
- Save production cost: No connector required on your PCB
- Save board space: Much smaller footprint than a traditional JTAG header ...
|
|
MicroController & Embedded Systems Too ...
|
|
10-pin Needle Adapter for ARM JTAG Programmer/Debuggers
... 20-pin 0.1"-pitch JTAG connector to a 10-pin needle connector.
J-Link Needle Adapter Features
- Save production cost: No connector required on your PCB
- Save board space: Much smaller footprint than a traditional JTAG header ...
|
|
The MicroController and Embedded System Store
|
|
LPC1768 (Cortex-M3) Header Board, USB & JTAG Connectors
... 10 ... pins
- Mini USB B-type connector
- 20-pin - JTAG connector ...
|
|
USD 38.33
MicroController & Embedded Systems Too ...
|
|
LPC1768 (Cortex-M3) Header Board, USB & JTAG Connectors
... 10 ... pins
- Mini USB B-type connector
- 20-pin - JTAG connector ...
|
|
USD 38.33
The MicroController and Embedded System Store
|
|
Atmel ATmega128-16AI Header board, ISP & JTAG connectors
... JTAG connector (top view on target board) for in-circuit programming and debugging with AVR JTAG In-Circuit Debugger & Programmer
- 5x2 pin STK500 compatible ISP connector ...
|
|
MicroController & Embedded Systems Too ...
|
|
|
|
Prototype Board for 40-pin AVR, with ICSP & JTAG Connectors
... , 10-pin STK500 Compatible ISP Port, JTAG port, Power Supply Circuit and Crystal Oscillator Circuit AVR Prototype Board Features
- Ships completely assembled and tested
- DIL40 microcontroller socket
- RS232 DB9 female connector
- RS232 ...
|
|
MicroController & Embedded Systems Too ...
|
|
TMS320 DSP USB JTAG Debugger/Programmer, XDS100v2 compatible
... targets 1.65V to 5.0V
- Uses both standard 0.1" 2×7-pin and 2×10-pin JTAG connectors
- No need for external power supply; all power is taken from USB and the ...
|
|
MicroController & Embedded Systems Too ...
|
|
Development System for 64- & 100-pin AVR on DIMM w/ ATmega128
... a bootloader system, but an actual AVR ISP built into the board. No additional power adapter is needed. The board also has both a 6-pin ISP port and a 10-pin JTAG ...
|
|
MicroController & Embedded Systems Too ...
|
|
2x5 (10-pin) 0.1
10 conductor flat ribbon cable, 15 cm in length, with 10-pin (2x5) female IDC connector mounted on each end. The connector has 2.54mm pin spacing.
This type of ribbon cable is used by most Atmel AVR JTAG debuggers and in-system ...
|
|
USD 1.90
MicroController & Embedded Systems Too ...
|
|
20-pin Standard to 10-pin Cortex Adapter for ARM JTAG Programmer
... pin ARM JTAG connector. This adapts the 20-pin 0.1"-pitch ARM Standard JTAG Connector to the 10-pin (physically 9-pin) 0.05"-pitch Cortex Debug Connector ... quot;) and includes a 20 cm (8") ribbon cable as shown.
- ARM-JTAG-20-10 ...
|
|
MicroController & Embedded Systems Too ...
|
|
Development & Prototype Board for 40-pin AVR, with ATmega16
... a time! A 10-pin programming connector is on the board so that you can program a different AVR chip (external programmer required). The board measures 14 × 8.2 cm (5.51 × 3.23").
40-pin ... 32 I/O pins
- UART, SPI, ADC
- JTAG ...
|
|
MicroController & Embedded Systems Too ...
|
|
|
|
10-pin Single-Row to 2x5-pin Male Header Adapter Board
... connectors directly on them, and are shaped such that they will have to be oriented "wrong" when connecting to this breakout board. This will put their Pin ...
|
|
MicroController & Embedded Systems Too ...
|
|
Development System for 64- & 100-pin AVR on DIMM w/ ATmega128
... a bootloader system, but an actual AVR ISP built into the board. No additional power adapter is needed. The board also has both a 6-pin ISP port and a 10-pin JTAG ...
|
|
The MicroController and Embedded System Store
|
|
20-pin Standard to 10-pin Cortex Adapter for ARM JTAG Programmer
... pin ARM JTAG connector. This adapts the 20-pin 0.1"-pitch ARM Standard JTAG Connector to the 10-pin (physically 9-pin) 0.05"-pitch Cortex Debug Connector ... quot;) and includes a 20 cm (8") ribbon cable as shown.
- ARM-JTAG-20-10 ...
|
|
The MicroController and Embedded System Store
|
|
Development & Prototype Board for 40-pin AVR, with ATmega16
... a time! A 10-pin programming connector is on the board so that you can program a different AVR chip (external programmer required). The board measures 14 × 8.2 cm (5.51 × 3.23").
40-pin ... 32 I/O pins
- UART, SPI, ADC
- JTAG ...
|
|
The MicroController and Embedded System Store
|
|
10-pin Single-Row to 2x5-pin Male Header Adapter Board
... connectors directly on them, and are shaped such that they will have to be oriented "wrong" when connecting to this breakout board. This will put their Pin ...
|
|
The MicroController and Embedded System Store
|
|
Atmel AVR JTAG Debugger & STK500-Compatible Programmer, USB
... connector (top view on target board). A jumper setting allows you to select which interface to use. A 10-pin ...
|
|
USD 27.90
MicroController & Embedded Systems Too ...
|
|
J-Link USB-JTAG for ARM, Cortex & Renesas RX
... compatible
- Standard 20-pin JTAG connector
- Wide target voltage range: 1.2V - 3.3V, 5V tolerant
- USB and 20-pin ribbon cable included ... and fully use a J-Link from another computer. Performance is just slightly (about 10%) lower than with ...
|
|
MicroController & Embedded Systems Too ...
|
|
J-Link Pro Bundle: USB JTAG Debugger/Programmer w Software
... compatible
- Standard 20-pin JTAG connector
- Wide target voltage range: 1.2V - 3.3V, 5V tolerant
- USB and 20-pin ribbon cable included ... and fully use a J-Link from another computer. Performance is just slightly (about 10%) lower than with ...
|
|
MicroController & Embedded Systems Too ...
|
|
|
|
