|
... . FEATURES: Smooth, low drag dish shape. White in color. INCLUDES: Two wheels REQUIRES: 24mm tires CA Glue to adhere tires to wheels, use GPMR6001. SPECS: Outer diameter: 49mm (1.9") Width: 24mm ...
|
|
USD 5.79
Hobby Fever
  |
|
... : Two tires Two foam inserts One small "Proline" decal REQUIRES: Mounting to wheels Gluing with CA glue (DTXR2000) SPECS: Overall diameter and width: 5" x 2.25" (127mm x 57mm) Wheel Diameter ...
|
|
USD 16.99
Hobby Fever
|
|
... 200mm touring cars INCLUDES: Two Matte Chrome Rims REQUIRES: Touring car HPI Vintage Tires (HPIC4793) CA Glue (DTXR2000) SPECS: Width: 1" (26mm) Diameter: 2" (52mm) COMMENTS: HPI Vintage Series Tires (HPIC4793) must ...
|
|
USD 9.29
Hobby Fever
|
|
... ). FEATURES: White plastic construction, dish face design INCLUDES: Four wheels REQUIRES: Tires, foam inserts and CA glue for mounting the tires (DTXR2000) SPECS: Diameter: 3.46" (88mm) Width: 1.57" (40mm) COMMENTS ...
|
|
USD 16.59
Hobby Fever
|
|
... the wheels INCLUDES: Two Velocity Dish wheels One 2 inch Proline decal REQUIRES: Tires and CA glue. Choice is modelers descretion. SPECS: Total diameter: 88.6mm (3.49") Diameter of bead mounting ...
|
|
USD 11.29
Hobby Fever
|
|
Original Olivetti Toner B0446 - black - ca. 15.000 Seiten bei 5 % DeckungFarbe: schwarzOEM: B0446Hersteller: OlivettiPassende Drucker: Olivetti d-Copia 16, d-Copia 200, d-Copia 200-MF
|
|
USD 102.16
EUR 71.99
Tintencenter.com - Druckerpatronen und Toner
|
|
|
|
...
- CopterX Li-Polymer Battery 11.1V 20C 1000mAh x 1
- Anaerobics Retainer, Grease, Thread Lock, CA Glue x 1
|
|
USD 259.99
Walkera 36, Walkera 35, Walkera V400, Walk ...
|
|
... on the pill. 7 seconds after application the pill will light, eventually lighting your cigarette, flash paper, levitating rose, etc...
There are many ways to use this astonishing device.
1. Remove ... ... MAGIC !
2. Stick a pill on a piece of flash paper (ordinary glue is enough since you do not need a lot of glue). Pour some jelly on your thumb (you can either ...
|
|
USD 20.15
New Planet Magic Shop
|
|
... BUT VERY DETAILED AND ARE INJECTION MOLDED IN CLEAR STYRENE PLASTIC. PLASTIC CEMENT OR THICK CA GLUES MAY BE USED TO ASSEMBLE THESE KITS.
|
|
USD 3.95
The Hobby House, Inc.
|
|
... easy assembly. Acrylic (water based paint) is recommended to get a good finish. Epoxy or CA glues are recommended for assembly.
|
|
USD 10.98
The Hobby House, Inc.
|
|
THIS PACKAGE IS 5' LONG. THIS MATERIAL IS USED TO REINFORCE CENTER SECTIONS OF WINGS AND TO REINFORCE FIREWALLS AND CAN BE APPLIED WITH POLYESTER RESIN OR EPOXY OR CA GLUE.
|
|
USD 2.99
The Hobby House, Inc.
|
|
... 4 3/4" OR 17 X 10 X 12 CM. PLASTIC MODEL CEMENT OR MEDIUM CA GLUE MAY BE USED TO ASSEMBLE THIS KIT.
|
|
USD 6.98
The Hobby House, Inc.
|
|
|
|
... power must be provided to power the Hall sensors. The trackball is attached with strong CA glue. Board comes as shown, with all components populated.
The hall-effect sensors and trackball combo ...
|
|
USD 18.91
GBP 11.50
SK Pang Electronics
|
|
... way under high loads.Once the length has been determined, stack togther and apply thin CA glue to make a solid, one-piece spacer.
|
|
USD 177.53
GBP 107.99
Robotbirds.com
|
|
... a non-event and damage is easily fixed at the field in seconds with thin CA glue.
A relaxed one evening build and aerobatic antics that will be the hit of your ...
|
|
USD 34.27
AUD 42.00
Nitrodude
|
|
... your PiddleBug requires repair; damage is easily fixed at the field in seconds with thin CA glue.
Designed to accept the popular ParkZone (PKZ3351) 2.4ghz Spektrum DSM2 Rec/ESC/Servo combo ...
|
|
USD 36.72
AUD 45.00
Nitrodude
|
|
... S-POU! requires repair; damage is easily fixed at the field in seconds with thin CA glue.
Designed to accept the popular ParkZone (PKZ3351) 2.4ghz Spektrum DSM2 Rec/ESC/Servo combo ...
|
|
USD 39.17
AUD 48.00
Nitrodude
|
|
... (part of the package header card )
REQUIRES: Sand and clean surface, Epoxy Glue (GPMR6045) for porous materials like wood or CA glue (GPMR6008) for plastics, cut to size and filler HCAR3400.
COMMENTS: Common ...
|
|
USD 3.79
Hobby Fever
|
|
... (part of the package header card )
REQUIRES: Sand and clean surface, Epoxy Glue (GPMR6045) for porous materials like wood or CA glue (GPMR6008) for plastics, cut to size and filler HCAR3400.
COMMENTS: Common ...
|
|
USD 3.99
Hobby Fever
|
|
... ). FEATURES: Yellow plastic construction, dish face design INCLUDES: Four wheels REQUIRES: Tires, foam inserts and CA glue for mounting the tires (DTXR2000) SPECS: Diameter: 3.46" (88mm) Width: 1.57" (40mm) COMMENTS ...
|
|
USD 17.99
Hobby Fever
|
|
|
|
