|
Development System for 8/14/18/20/28/40-pin PIC, On-board ICD
... circuits and peripherals. It features an on-board programmer with ICD support, so no external programmer is needed.
Every component of the board ...
|
|
USD 139.00
The MicroController and Embedded System Store
 |
|
PIC18F4520 Board, 8 relays, 8 isolated input, RS485, RS232, PS/2
... )
- On-board USB 2.0 programmer and in-circuit debugger
- Jumpers to set resistors as pull-up or pull-down, and to enable/disable on-board peripherals
- PS/2 connector
- Power supply circuit accepts ... of the board and pins are marked on both the top and bottom of the board. These marks describe connections to the microcontroller, operation modes, and other useful information.
On-board programmer and in-circuit debugger ...
|
|
USD 124.00
The MicroController and Embedded System Store
|
|
Prototype Board for 28/40-pin PIC, w/ PIC16F887 & USB bootloader
... boards and create a complex device with no soldering at all. Reset circuit is connected to the MCLR pin of the MCU. Connectors for in-circuit ...
|
|
The MicroController and Embedded System Store
|
|
Serial EEPROM Programmer & Programming Board
... circuit (Gnd, MCU Reset and up to 4 connections for different protocols). In-System Programming Connector
This programmer allows EEPROMs to be read/programmed that are already soldered onto a board ...
|
|
USD 159.00
The MicroController and Embedded System Store
|
|
Microchip PIC Programmer and Prototype Board, 18-pin
... board is everything you need for getting started with PIC microcontroller programming. It has an on-board power supply voltage regulator circuit, microcontroller reset circuit, crystal oscillator circuit ... silkscreen component mark
- Dimensions 61 ...
|
|
The MicroController and Embedded System Store
|
|
FLEX Thru Hole Prototyping Board
... small custom circuits that can be used with the FLEX Full and FLEX Light Microchip dsPIC development systems. The board makes several common pinholes available for connecting electronic components.
The patterns marked "piggybacking ...
|
|
The MicroController and Embedded System Store
|
|
|
|
Mini BASIC-Programmable Serial-to-Ethernet Development Board
... Serial-to-Ethernet Module. The board features a standard RJ45 socket ... Baudrates of up to 460800bps;
- None/even/odd/mark/space parity modes;
- 7/8 bits ... BASIC Platform documentation Click on the purple book icon to the left ...
|
|
USD 69.00
MicroController & Embedded Systems Too ...
 |
|
dsPIC33FJ128MC802 Motor Control Board w/ Bootloader, XBee socket
... The ICSP header is used for in-circuit serial programming with compatible programmers. Since the board comes with a preloaded bootloader, ... isolated from the rest of circuitry by using two jumpers marked as PGD" and PGC near the PWM connectors. You ...
|
|
The MicroController and Embedded System Store
|
|
dsPIC33FJ128GP802 Development Board, XBee socket, RS485, I2C
... by default.
ICSP Connector This connector is used for in-circuit serial programming or for debugging. The programming Data and Clock ... RA4 and RB4 by two jumpers marked as LED Enable on the back of the board. The jumpers are open by default. ...
|
|
The MicroController and Embedded System Store
|
|
MAX232 Board with High-Quality DB9 Connector
... MAX232 circuit to a prototype board. There is a Dual RS232 Driver/Receiver MAX232N provided on the board. This circuit is necessary for establishing RS232 communication. All available components are clearly marked on the board so that there is no need for additional schematics. Description
The IrDA PROTO Board features ...
|
|
USD 7.90
The MicroController and Embedded System Store
|
|
MMC Ready Board with PIC18F252 Device and Voltage Regulator
... connection with the PICFlash programmer. The board also includes a voltage regulator, so that you don't have to connect additional power supply circuits. The board can be connected to external electronic or ... save development time.
- The board is clearly marked, which makes connection with external circuits easier.
- This tool enables you to easily build your MMC/SD based device.
- The board is an indispensable tool for ...
|
|
USD 29.00
The MicroController and Embedded System Store
|
|
Relay 4 Board with Screw Terminals and IDC10 Connector
... board allows your device to jump over the boudary of output digital signals into the world of higher voltages and currents. Features
- ULN2803 circuit ... solution suitable for all MCU architectures.
- Board is clearly marked, which makes it ...
|
|
USD 29.90
The MicroController and Embedded System Store
|
|
|
|
Atmel AT90USB162 Header & Prototyping Board, USB
... board to just an AT90USB162 header board, as the MCU pins are available via pads on the main section. These pads are marked ... be used as indicators of activity
- On-board mini-USB connector, oscillator and reset circuit, as well as power indicator ...
|
|
USD 19.00
The MicroController and Embedded System Store
|
|
Atmel ATxmega128A1 Prototype Board, USB, JTAG, PDI
... through pads which are clearly marked with a silkscreen on both the top and bottom of the board. The prototyping area allows you to add your own circuit components to create a complete ... ATxmega128A1 can be programmed via provided PDI and JTAG interfaces useful for in-circuit debugging.
What's On Board A low-power, high-performance and peripheral-rich AVR-based MCU ATxmega128A1. Power ...
|
|
USD 29.00
The MicroController and Embedded System Store
|
|
Microchip PIC18F2550 Header & Prototyping Board, USB bootloader
... circuit debugging with external hardware such as the PICFlash2 or mikroProg for PIC.
PIC18F2550 Board Features
- Add your own circuitry and create a final, standalone product
- Board ...
|
|
USD 19.00
The MicroController and Embedded System Store
|
|
PIC18F4520 PLC Board, 16 relays, 16 isolated input, RS485, RS232
... relays. All MCU pins are marked on the back and front of the board. Supports Telit GSM/GPRS ... board MAC & PHY, 8 Kbytes of Buffer RAM and SPI).
On-board USB 2.0 programmer The board features a built-in USB in-circuit ...
|
|
The MicroController and Embedded System Store
|
|
Development & Prototype Board for 40-pin AVR, with ATmega16
... circuit. An optional white plastic case is available so you can turn your AVR project into a final product.
The board ... available for further connections through five IDC10 headers with clearly marked pins. There are more than 70 add-on modules ...
|
|
USD 29.00
The MicroController and Embedded System Store
|
|
ATxmega128A1 Development & Prototype Board, Bootloader, USB-UART
... board contains header pins for all available microcontroller ports, grouped according to function and marked clearly on the silkscreen. It also contains a USB-UART module, prototyping area and a power supply circuit ... -install it, or want to perform in-circuit debugging, the board has pads where you can install a 2×5-pin JTAG header. The board also has pads where you can install a ...
|
|
USD 35.00
The MicroController and Embedded System Store
|
|
... Introduction to the Book
1.2 Electronic Circuits: Analogue and ... Circuit Boards and Multi-Chip Modules
2.20 System on a Chip and System in a Package
2.21 Mechatronic Systems
2.22 Intellectual Property
2.23 CE and FCC Marking ...
|
|
MicroController & Embedded Systems Too ...
|
|
... Introduction to the Book
1.2 Electronic Circuits: Analogue and ... Circuit Boards and Multi-Chip Modules
2.20 System on a Chip and System in a Package
2.21 Mechatronic Systems
2.22 Intellectual Property
2.23 CE and FCC Marking ...
|
|
The MicroController and Embedded System Store
|
|
|
|
