TRENDnet?s TE100-S16 is a high performance auto-sensing NWay switch that automatically negotiates between 10Base-T and 100Base-TX network speeds. All ports support half- and full-duplex that allows maximum network performance. It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths. Designed and built to increase network bandwidth, TRENDnet?s TE100-S16 is the best solution for both corporate and small business network environments.
- Compliant with IEEE 802.3 10Base-T, IEEE 802.3µ 100Base-TX
- Support 16 UTP/STP RJ-45 10/100Mbps NWay auto-sensing ports
- Auto-MDIX on each port
- Supports store and forward switching architecture with non-blocking full wire-speed performance
- Half- and full-duplex operation for each port
- Supports aging function and 802.3x flow control for full-duplex mode and back pressure flow control for half-duplex mode operation
- Auto-learning of network configuration
- Built-in 8K entries per device for Filtering Address Table
- 512KB per device RAM buffer.
- Plug and Play
- EIA-19 Rack Mountable
- 5-years warranty
- Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, ANSI/IEEE 802.3 NWay auto-negotiation
- Connectors: 16 10/100Mbps shielded RJ45 Auto-MDIX ports
- Network Cables:
- Ethernet: Cat. 3,4,5, UTP/STP, EIA.ITA-568 100 Ohm
- Fast Ethernet: Cat. 5, UTP/STP, EIA/TIA-568 100 Ohm
- Cable Length: 100 meters maximum
- Protocols: CSMA/CD
- Data Transfer Rate:
- Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
- Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex)
- Data RAM Buffers: 512KB per device
- Filtering Address Table: 8K entries per device
- Internal Power Adapter: 100 ~ 240 VAC, 6 watts max.
- Diagnostic LEDs: Power, Link/Activity, 100Mbps
- Weight: approximately 2.0 Kg (4.4 lb.)
- Dimensions: 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inches) (W x H x D)
- Temperature:
- Operating: 0° ~ 40°C (32° ~ 104°F)
- Storage: -10° ~ 70°C (14° ~ 158°F) Humidity:
- Operating: 10% ~ 90% RH
- Storage: 5% ~ 90% RH
- Certifications: FCC Class A, CE Mark A, VCCI-A
- Easy Upgrade: Ethernet workgroups are able to upgrade to Fast Ethernet by changing adapters and hubs without changing switches.
- Flexibility: All ports automatically negotiate 10/100Mbps network speed. All ports are Auto-MDIX; connection can be made with either a straight through or a crossover cable.
- Cost Effectiveness: Provide 10/100Mbps of Fast Ethernet at an affordable rate.
- Performance: Top performance at an affordable price.
|