With its rugged corner-mounted casters, and extendible luggage-type handle, you are certain to appreciate the freedom and simplicity of AL1R. Whether you are a Presenter, Outreach Group, Scout Leader, Auctioneer, Teacher, Service Group or Solo Musician, the AL1R makes your setup simple, practical and cost effective. Its efficient 2-way design will give you the sound quality and projection you need to deliver your best performance.
A pole-mount receptacle in the bottom panel lets you mount your AL1R on any 35mm pole or tripod stand for extended coverage in larger rooms. When on its side as a stage monitor, the AL1R's angled side panel gives it a 45 degree up-angle so you can hear well and perform your best.
When mounted on a pole or high table, the mixer panel may be rotated so the mixer controls are on the rear, keeping them within arms reach. This unique PivotMix™ design is a SoundTech exclusive.
The AL1R mixer includes two low-impedance microphone inputs, a line-level input for instruments or projection system, and a stereo-bridging RCA input for easy interface to cassette decks and CD players.
Powering the AL1R is the rear-mounted SoundTech MC100 module. In addition to 100 Watts of output power and the ability to run the XL1 extensive speaker for wider coverage, this module incorporates a 5-band graphic equalizer to custom tailor the sound to your specific needs.
Musically speaking, the AL1R's wide dynamic range and smooth wide range response makes it perfect for solo acts, particularly for vocal and electroacoustic guitar.
Each AL1R is rabbet-dado fabricated using quality 5/8" composite woods, chosen for their good sound and durability. SoundTech's custom-formulated wear-resistant black carpet covering and elegant curved FineDiamond™ grille form the exterior, with black metal corners and an attractive red-accent logo to complete the modern appearance.
Each AL1R System is proudly manufactured in the USA, and is covered by SoundTech's "Built Tough" 5 Year warranty, Specs
FEATURES
Channel 1 Combination XLR & 1/4", both MIC level
Channel 2 Combination XLR (Mic level) & 1/4" (line LEVEL)
Channel 3 1/4" line level
Channel 4 Dual RCA line level
Power @ 8 Ohms 65 W FTC
Power @ 4 Ohms 100 W FTC
EQ 100, 400, 1k, 3k, 6k, Hz
Distortion 90 dB
Frequency Response 65-20k Hz
Speaker Impedance 8 Ohms
Sensitivity (1W/1m) 97 dB
height (less handle) 21.0(533)
width 13.0(330)
depth 12.87(327)
Net Weight Ibs. (kg) 35.4(19.3)
Woofer STS110.8HP
Tweeter TLX-1
Crossover CXX12
Mixer Module 1520 5001
Amp/EQ Module MC100
Pole Mount SMB36
|