The RLM Argent Wood Shaft, new for 2007 from SMT Golf!
The RLM or Reactive Linear Motion Shafts, utilizing Long Fiber Technology, are made to a constant taper from butt to tip. They require very little sanding to produce and the feel of a lively tip is very much favored by amateur golfers of all levels.
RLM Shafts have approximately 95% of their graphite fibers still intact - a full 30% more than a typical graphite shaft. What this means is that the energy you deliver to the ball through that shaft is deployed through actual graphite fibers, instead of epoxy resins. The feel that you receive back from impact is also brought to you through the same full strand graphite fibers for more feel and control.
The Argent comes in a Dark Silver to Charcoal Fade in a rich satin finish.
FlexWeightLengthTipButt PTSTorqueCPM*Bend PointRSSR R
S
X 77g
78g
79g 46
46
46 0.335
0.335
0.335 0.630
0.630
0.630 2 5/8
2 5/8
2 5/8 3.5
3.5
3.5 265
280
295 Mid
Mid
High 85-95
95-105
105-115 * CPM is measured with a 38" beam length and a 200g tip weight.
How will this shaft play and who is it for? From Mike Tait, President, SMT Golf
ARGENT - Probably will be the best seller, but for the wrong reason. That reason being that it is the least expensive of the three RLM shafts. The Argent would tend to lend itself to the golfer that is looking for a bit more accuracy due to the fact that it is the heaviest of the lineup. A slight two tone fade from dark silver satin to charcoal satin finish. This shaft looks specatcular with just about any clubhead on the market. I also expect this shaft to end up in a huge amount of fairway woods as its design will aid in getting shots airborn while its weight will lend itself nicely to the finished club.
Comes with a free SMT grip and SMT's 100% Lifetime Warranty.
Read the entire SMT RLM Shaft Story. Tip Trimming Instructions Butt trim to length for a driver.
Fairway wood installation - tip trim 1" maximum, however playing without tipping is acceptable and will result in a slightly higher ball flight.
|