GD-525 Moly Grease is a synthetic, high temperature grease designed for the splines and u-joints of motorcycles with final drive shaft trains. It may be used also to lubricate all mechanical movements (such as swing arms, bushings, pins, etc.) (Not for wheel bearings or chains.)
ApplicationsGD-525 Moly Grease is a synthetic, high temperature grease designed for the splines and u-joints of motorcycles with final drive shaft trains. It may be used also to lubricate all mechanical movements (such as swing arms, bushings, pins, etc.) (Not for wheel bearings or chains.) BenefitsGD-525 Moly Grease provides uniform and durable boundary lubrication under extreme pressure to prevent wear on the surfaces of the two mating steel surfaces over a wide temperature range. With a high dropping point, it will not run off from heat. GD-525 is adhesive to prevent wash out and sling off. A synthetic oil has a higher tolerance for heat than mineral oil, which means synthetic oil resists oxidation and evaporation better: it has also a better film forming and retention capability. In combination, the components of GD-525 provide exceptional capability to reduce friction and wear over a long period of time.Molybdenum disulfide: Moly is a solid film lubricant with a low coefficient of friction and an affinity for steel. The moly decreases the friction of the two counter-moving sliding surfaces by filling microscopic pores of the metal surfaces and plating out over the surface. GD-525 lessens metal-to metal contact to reduce friction and wear.
|
