Team Associated Factory Team B4 asc9035 asc-9035 asc 9035 Kit
Associated has made the B4 to be one of the best handling cars in the world. You really can't beat this car in the turns. It's precision is unrivaled. But be awaer that this buggy does not handle jumps quite as well as the Losi XXX BK2 does. Read what Associated claims below.
Now you can get your own full-option Factory ride buggy complete with over $150 worth of Factory Team upgrades! The B4 Factory Team features all molded carbon components including the chassis, front and rear shock towers, front and rear A-Arms, chassis brace, and top plate. The battery strap is made of woven carbon fiber, and comes with a chrome/black AE Factory Team sticker.
The Team's standard threaded, hard-anodized, PTFE-coated shocks with Unobtainium shafts handle the dampening on all four corners. A complete set of 14 PTFE sealed bearings are included to ensure smooth, efficient operation. Lightweight outdrives are included, as well as a new clear injection-molded gear cover. To get the power to the ground, the B4 Factory Team comes with Pro-Line M3 Holeshot rear tires and M3 compound wide-body buggy front tires on white Pro-Line dish wheels.
No Factory Team kit would be complete without a full array of Factory Blue components, so the B4 includes blue Titanium turnbuckles, aluminum servo mounts, wheel spacers, front hinge pin brace, center-drilled front axles, screws, body clips, and a lightweight milled blue aluminum motor mounting plate. Here are some features:
- Molded carbon chassis components
- Threaded, hard-anodized PFTE-coated shocks
- Unobtanium shock shafts
- Factory Blue aluminum and titanium parts
- PFTE sealed bearings
- Angled bellcrank steering minimizes bump steer to maintain constant steering angles throughout the full range of suspension travel.
- Trailing front axle or optional inline steering blocks can be used to tune steering response.
- Front shocks are mounted behind the shock towers. All four suspension arms utilize a captured hinge pin design that uses no E-clips.
- The forward-swept front end design provides maximum front end ground clearance. Chassis underside is contoured for maximum clearance when cornering, and minimal ground contact area on hard landings.
- High torque capacity, double-sided slipper provides finer adjustment, easier assembly, and lower rotating mass than comparable double-sided slippers.
- Impact-resistant rear motor guard. Lower motor, battery, shock and body mounting positions give the B4 a lower CG for higher cornering speeds and greater stability. Length:Rear track:Front track:Height:Wheelbase:Ground clearance: 14.375" (365mm)10" (254mm)9.75" (248mm)4.25" (108mm)10.625" (270mm)1" (25.4mm)
- RC10B4 Factory Team Buggy Kit
- Anodized & Threaded Shocks
- Tires, foam inserts & wheels
- Titanium turnbuckles
- Factory Team parts
- Clear Lexan Body
- Instruction Manual
Equipment Needed: 2-Channel Radio with one high torque steering servo. 6 cell battery pack. 6 cell peak battery charger. Electronic speed control (ESC). Motor. 48 Pitch pinion gear.
Kit requires assembly.
|