Herstellernummer : BS-00047 EAN : 805990009374 TTo that end we are proud to introduce the SAT 265. Blue Sky’s SAT 265 is a 2-way, tri-amplified, 300-Watt, High Output Near-Field Monitor which features two 6.5” high excursion hemispherical woofers and a 1” dual ring radiator tweeter with integral waveguide, for superior off-axis response. The SAT 265 is powered by a dedicated low distortion 100-Watt amplifier for each of the 6.5” woofers, and a low distortion 100-Watt amplifier for the tweeter. The SAT 265 effortlessly delivers clean and accurate sound with a frequency response of 80Hz to 30kHz +/-3.0dB (200Hz to 15kHz +/-1.5dB). For full compatibility with Blue Sky’s SUB 15 Universal, SUB 212, SUB 12 and BMC (Bass Management Controller). The rear panel also has controls for “full space” (placement in a room) or “half space” (mounted in a baffle wall) operation, along with HF level trims, as well as controls for variable gain settings. The SAT 265 is designed to provide the best performance in the vertical configuration. The SAT 265 has been designed to integrate perfectly with Blue Sky’s new SUB 212. The SUB 212 is a sealed box, push-pull, 400-Watt subwoofer. The push-pull configuration reduces distortion, provides increased output, and features an anechoic frequency response of 25Hz to 200Hz, +/-3dB. In addition, the SUB 212 also has built-in 2.1 bass management electronics with both a 4th order 80Hz Linkwitz-Riley low-pass filter and a 2nd order 80Hz high-pass filter that is perfectly matched to the response of the SAT 265 (the SUB 212 is also compatible with the SAT 265, SAT 6.5 and SAT 5). When combined, the SAT 265 and SUB 212 provide a stunningly accurate and engaging, full-range monitoring system. SAT 265 Specifications Enclosure .75” MDF with 1” front / rear baffle and internal bracing .25” x 20 inserts for attachment of OmniMount type 60 brackets Dimensions (H x W x D): 19.8” (503 mm) x 8” (203 mm) W x 11.63” (296 mm) D* *For complete dimensions see diagram below Weight: 48.5 lbs. (22 kg) 1” Tweeter Dual Ring Radiator Diaphragm with integral waveguide High-power handling ferrite motor structure Fully video shielded Dual 6.5” Hemispherical Woofers High-excursion design with a vented motor Cast aluminum frame 1.5 inch aluminum voice coil Copper shorting rings for lower distortion Ultra low power compression design Mica filled polypropylene cone with rubber surround Fully video shielded Amplifiers & Electronics 3 x 100* Watts into 4-Ohm (for each woofer and tweeter) .01% THD + noise at rated power @ 1 kHz *Power is limited by protection circuitry XLR electronically balanced input Fixed and Adjustable gain controls B00® optimized crossover “full space” & “half space” / baffle compensation controls Tweeter level trims Input impedance: 10K balanced Common Mode Rejection 40dB typical @ 60Hz Voltage Sensitivity (high gain) 200mv = 90dB SPL @ 1 meter Maximum Input Level: +24dBu balanced Frequency Response: +/- 3dB 80Hz to 30kHz +/-1.5dB 200Hz to 15kHz
|
