Herstellernummer : BS-00044 EAN : 805990200016 SUB 12 The Blue Sky SUB 12 was specifically designed to complement the SAT 6.5 and SAT 6.5 MK II Satellite speakers. Featuring a cast aluminum frame, 12" forward-firing driver with 2" voice coil, the SUB 12 has a dedicated 200-watt amplifier with a frequency response of 30 Hz- 200 Hz +/* 3 dB (anechoic) and a typical response of 20Hz to 200Hz (3000 Cubic Foot Room). In addition, the SUB 12 has a built-in 2.1 bass management system with a 4th order, 80 Hz Linkwitz-Riley low-pass filter and 2nd order 80Hz high pass filter for the satellite. Rear panel functions include: Right/Left In and Out; SUB In and Out (for connecting multiple subwoofers); Mute and Phase switches; SUB Gain & Power LED; Power switch; and Slo-Blo Fuse. Measuring 18"H x 15"W x 20"D and weighing 62 lbs., the SUB 12 features MDF construction with four recessed 1/4" x 20 threaded inserts for either spiked or rubber feet. The SUB 12 is also fully compatible with Blue Skys I/ON, SAT 5 / SAT 5 MKII and SAT 12*. Additionally the SUB 12 is compatible with any THX pm3 approved nearfield monitor (visit http://www.thx.com for more information). *NOTE: When the SUB 12 is used with the SAT 12, multiple SUB 12s should be used. General Specifications - Sub 12 • All measurements / specifications are measured using the SUB 12s direct input, which does not have a low pass filter. • Voltage Sensitivity: 90dB SPL @ 100mv @ 1M (40 to 80Hz bandwidth limited) • Frequency Response (anechoic): 30 to 200Hz +/-3dB • Typical In-Room Response: 20 to 200Hz (3000 Cubic Feet) Bass Management Section • Input Impedance: 20k Ohms balanced • Common Mode Rejection Ratio: 40dB typical @60Hz • Maximum Input Level (all inputs): +24dBu balanced • Maximum Output Level:+24dBu balanced • Output Impedance:200 Ohms balanced • Auto Mute Time Out: >15 Minutes • Mute Threshold (all inputs): 30mV • Left & Right Inputs to Sat Outputs • Gain (balanced in and out): 0dB • High-Pass Filter type: 2nd order Linkwitz-Riley • High-Pass Filter Cutoff: 80Hz • High-pass Filter Q: 0.707 • THD + Noise: 0.002% @ 1kHz @ +4dBu • Left & Right Inputs to Sub Out • Gain: 0dB • Low-Pass Filter Type:4th order Linkwitz-Riley • Low-Pass Cutoff: 80Hz • Subwoofer Direct In to Direct Output • Gain: 0dB • Low-Pass Filter: None • Enclosure • Solid 3/4" MDF construction with 1"" MDF Front and Rear Baffle" • Viscoelastic energy absorbing front baffle coating • Flush mounted driver • Isolation feet are included. Inserts for optional attachment of spike feet. • Dimensions are 18" H x 16" W x 20" D (22.07" with heatsink and grill) • Weight 62lbs. • 12" Woofer • Long excursion design with cast aluminum frame. • 2" voice coil with vented motor for high power handling • Fully video shielded • Subwoofer Amplifier • Discrete symmetrical bipolar design with localized feedback • 200-W RMS into 4 Ohms • THD + Noise less than 0.015% at rated power @100Hz • Adjustable gain control
|
