The Digi-T system is quick, secure, and easy to use. As pictured above the rubber eyeguard is removed from the eyepiece (left), The Digi-T threaded ring (middle) is slipped over the top of the eyepiece and the 3 set screws are tightened (with the included wrench) into the groove left vacant by the rubber eyeguard, the proper step ring (right) then couples the Digi-T ring to the camera. In some cases a lens extension tube or intermediate ring may be required, these are included with the Digi-T system kits as needed.
The STDT1 is recomended for the following Nikon cameras: 800/900/950/990/995/E4500
|