HS-5645MG SERVO HITEC

Price	USD 62.47 AUD 75.00
Seller	Nitrodude

HS-5645MG Very good quality servo very high torque

Ideal for rudder on large scale aircraft
Metal Gears

Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.18sec/60 degrees at no load
Operating Speed (6.0V): 0.15sec/60 degrees at no load
Stall Torque (4.8V): 143oz/in. (10.3kg.cm)
Stall Torque (6.0V): 168 oz/in. (12.1kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
Current Drain (6.0V): 9.1mA/idle and 500mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears and 1 Resin Metal Gear
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
Weight: 2.1oz. (60g)

WillyFogg.com doesn't sell any of the products listed on our site.
To buy a product you need to use the link provided and visit the seller's site.

Similar products

HS-81 SERVO HITEC USD 62.47 AUD 75.00	HiTEC HS-50 Servo USD 62.47 AUD 75.00
HiTEC HS-56HB Servo USD 62.47 AUD 75.00	HiTEC HS-65HB Servo USD 62.47 AUD 75.00

Similar products from this seller:
HS-311 - Standard Servo HS-311 - Standard Servo Pack of 4 HS-425 Dual BB Servo HS-5625MG - Digital Servo HS-645MG ULTRA TORQUE 8KG SERVO ALL METAL GEARS HS-77BB Low Profile Aileron Servo Hybrid HS-81 SERVO HITEC HS-85MG - Mini servo, metal gear HS5955TG - Digital Servo HS-225BB Mighty Mini Servo View all products of this seller

HS-5645MG SERVO HITEC

Similar products from this seller: