Download Product Brochure
Overview - NEW LOWER PRICE!
XiNCOM XC-DPG503 is a VPN capable Dual WAN Gateway with industry standard IPsec encryption. It provides extremely secure LAN-to-LAN connectivity over the Internet. The 503 supports VPN by encryption, encapsulation, and authentication using the following methods: DES/3DES/AES, MD5, SHA-1 and SHA-2; up to 50 IPsec tunnels are permitted. VPN connection redundancy is maintained by VPN Auto Failover. In the event of a VPN tunnel failing, the XC-DPG503 will re-establish the tunnel with the second WAN port connection.
The XC-DPG503 has dual WAN ports that allow you to connect two broadband connections of any type, including Cable, DSL and/or T1 for ultimate redundancy via the automatic fail-over and increased bandwidth through load-balancing. With features like NAT, SPI Firewall, DHCP server and Access Filters makes this a must have all-in-one solution for any small to medium size network.
This gateway is very easy to configure and managed with a HTTP graphical user interface (GUI), remote web management, e-mail alerts and SNMP. Additionally this router can be used within a network with support for Static Routing and RIP-1/RIP-2 Dynamic Routing. With the addition of UPNP you will be able to dynamically open and close ports required by certain software automatically. With QoS you will be able to schedule and direct your network traffic to take advantage of your available bandwidth.
Basic VPN setup with the XC-DPG503 Twin WAN Gateway:
The 503 VPN Gateways serve as VPN endpoints with Auto Failover capabilities. This creates a secure tunnel and redundant connectivity for a Virtual Private Network.
Features:
VPN Security:
Full VPN Endpoint with support for up to 50 VPN tunnels using the IPsec encryption protocol. VPN security is supported by encryption, encapsulation, and authentication using the following methods: DES/3DES/AES, MD5, SHA-1 and SHA-2; up to 50 IPsec tunnels are permitted.
VPN Failover:
VPN Failover: Two XC-DPG503 gateways that establish a virtual private network will provide VPN failover by constantly monitoring an active link between endpoints. In the event of a VPN tunnel failing, the XC-DPG503 attempts to re-establish the tunnel. If the retry is unsuccessful, the Gateway then uses the second WAN port and the VPN tunnel is once again re-established.
2 x 10/100 WAN Ports:
The XC-DPG503 incorporates dual 10/100 WAN ports, complete with auto-crossover for easy connection to an existing network. All popular DSL and Cable Modems and connection methods are supported, including Fixed IP, Dynamic IP, PPPoE, even multiple-session PPPoE. 4-Port 10/100 Switch:
The XC-DPG503 VPN incorporates a 4-port 10/100 N-Way Ethernet Switch, complete with auto crossover for easy connection to an existing network. Load Balancing:
Allows you to use both WAN ports simultaneously, increasing your available bandwidth. You can set load balance type by Packets, Bytes RX+TX, and Sessions. Automatic Fail-over:
If one broadband connection goes down all traffic is automatically re-routed through the second broadband connection. Stateful Packet Inspection Firewall:
Protects your network using advanced SPI against malicious and DDoS attacks. Advanced NAT features:
Access Filters, DMZ, DDNS, Remote Management, Dynamic or Static Routing, Special Applications, Virtual Servers, SNMPv1. Access Filter:
Gain fine control over the Internet access and applications available to LAN users with a powerful URL Blocking Engine. Five (5) user groups are available, and each group can have different access rights. Rack Mount Support:
This Twin WAN VPN Gateway comes equipped with rack mount supports that fit a standard 19' rack mount. 5 year warranty with tech support and firmware upgrades!
XC-DPG Twin WAN Router Dimensions / Weight
9.63in / 244mm (W) x 5.63in / 143mm (D) x 1.18in / 30mm (H) / 1.15lbs / 521g (wt.) Delivery time for this product is ex-stock
|