M1-ATX DC-DC ATX 90W
Beskrivelse
Her er det et meget fleksibelt power for bruk i bil med både 12Volt og 24volt. Samtidig styrer du automatisk Power-ON og Power-OFF. I tillegg kan du sette jumpere til å slå av 5volt som går til USB, minne ol. Vanligvis står 5volten på hele tiden og tapper batteriet ditt tomt hvis du ikke fysisk skrur av poweret. Her kan du sette avslåingen tidstyrt med jumpere til å slå seg av etter 5 sekunder eller minutter eller aldri. Dette poweret er også laget for å slå på forsterker, med den funksjon som gjør at du slipper å høre den skarpe lyden når poweret skrur de på. Poweret er rett og slett et gjennomført stykke arbeid. Spesifikasjon Innhold
Poweret
ATX kabel
3 stk kabler for power+ og -, og for power ON
1 stk power signal kabel til hovedkortet
Bruker manual
Intelligent Automotive / Car DC-DC ATX PC Power Supply
M1-ATX is an intelligent vehicle (car, boat, electric cart, etc) 12V DC-DC ATX PC power supply. Designed to provide power and to control the ON/OFF switch of a motherboard (PC) based on ignition status, M1-ATX is a wide input (6-24V) vehicle or car DC-DC ATX power supply capable of surviving tough car engine cranks (down to 5.7V) as well as transient over-voltage situations.
M1-ATX has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown vehicle / car timing schemes. By removing all user-selectable jumpers, M1-ATX becomes a traditional PC PSU with no ignition control and it can be used in non-vehicle applications.
Even if your computer is totally OFF, a PC will still consume few hundered milliwatts, needed to monitor PC ON/OFF status. When the computer is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts. No matter how big your car battery is, it will eventually drain your vehicle / car battery in a matter of days.
While in deep sleep mode, M1-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down (using a shutdown controller) until battery levels reach safe levels again.
No more dead car batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M1-ATX the premier solution for dc-dc ATX vehicle / car power supply solutions.
M1-ATX comes equipped with ATX, HDD and Floppy cable harness, jumpers, faston connectors and 2 pin cables for motherboard ON/OFF switch. Just connect it to your 12V or 24V car / boat / RV battery and power up your PC.
M1-ATX is formfactor compatible with all Casetronics enclosures.
Do not try this PSU with Pentium 4s, works with all VIA mini-ITX boards and some low power Pentiums and AMDs, please check your motherboards specs and make sure that the CPU is not getting V(core) from the 12V rail, must be on the 5v rail. Stay away from motherboards that have 4 pin 12VATX connectors, that that is a good indication that the M/B is using 12V for V(core).
Spesifikasjon
Smart Car Power Supply
- ATX, 6-24V wide input range
- Intelligent shutdown controller
- ON/OFF motherboard control
- Survives vehicle engine cranks
- Battery deep discharge prevention
- High efficiency, 90 watts output
- Works with 12V / 24V car batteries
- "Anti-Thump" Amplifier remote control
- Automotive fuse (mini-blade)
- Works with all VIA mini_ITX M/B
Relaterte linker M1-ATX Manualen
Spesifikasjoner
M1-ATX guiden
M1-ATX dimensjoner
|
WillyFogg.com doesn't sell any of the products listed on our site.
To buy a product you need to use the link provided and visit the seller's site.
|
This product was deleted from the seller's web site, however you can check the boxes below to see if there are similar products by other sellers.
|
|
|