Turbelle® nanostream® 6055 is an electronic speed controlled pump operating on safety extra-low voltage. It is ideal for use in every aquarium with a volume of 40 to 500 litres (10.5 to 132 USgal.) permitting washing of waves or simulating tidal currents. It contains a new microprocessor-controlled motor and thus can be called an intelligent pump: The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about 30 per cent lower than in conventional pump motors.
The pump will be stopped immediately in case of blockage. After the blockage has been removed, the pump will start up automatically after a delay of 20 seconds.
The pump driver has been provided with a fish care function, which causes a revolution of the screw every twenty seconds when the pump is at a standstill.
All pumps with an electronic motor can be controlled by Multicontroller 7094 and 7095 as well as by Singlecontroller 7091.
As a standard feature, Turbelle® nanostream® is supplied with a magnetic holder, which enables uncomplicated attachment at any position on the aquarium pane.
- Propellor Technology
- Low Motor Heat
- 3D adjustment
- Magnet holder for glass panes up to 19mm
- Integrated protective thermostat
- Safety extra-low voltage
- Controllable speed, wave simulation, tidal currents
For aquariums from 40 to 500 litres (11 to 132 USgal.)
Flow rate: 1,000 to 5,500 l/h (264 to 1,453 USgal./h)
Energy consumption: 4 - 18 W
Voltage / frequency: 230V/50-60Hz
Cable length: 5 m (196.8 in.)
Dimensions: diam. 70 mm (2.7 in.), output: diam. 40/15 mm (1.5 / .59 in.)
|