Switch 16 puertos VDSL2 (100Mbps) + 2p Combo (Giga RJ-45 o SFP), incluye Splitter Pagina nueva 1
SMC's VDSL2 Extended Ethernet network solution provides an alternative cost-effective solution for network/Internet access to multi-unit buildings or enterprise environments such as hospitals, universities, and manufacturing facilities. Using existing category 1, 2, or 3 wiring, SMC's Extended Ethernet technology is able to deliver up to 100Mbps of broadband connection for distances up to 5000 feet/1500m. SMC's Extended
Ethernet solution minimizes the hassle involved in rewiring by delivering both voice and data access on the same line as Plain Old Telephone Service (POTs). SMC's EE solution is the best choice for service providers to supply broadband access with minimal changes to existing wiring infrastructure.
VDSL2 delivers higher speeds than are possible using
VDSL1 or ADSL2+ technology. This enables the provider to offer a larger range services over the existing telephone wires which have been unavailable due to the high bandwidth requirements such as HDTV streaming and Video On Demand. The TigerAccess? Extended Ethernet Solution includes the TigerAccess? EE Switch and TigerAccess? EE CPE (Customer Premise Equipment). SMC's Extended Ethernet Switch-SMC7816M/VSW combines voice and high speed data signals for delivery over standard telephone cable to multiple users in residential or commercial buildings. Ethernet data signals are received on the uplink ports of the switch and passed to the 16 Extended Ethernet ports on the front panel. These data signals are then passed to the CPE via the other Extended Ethernet connector on the front panel. The switch supports a full L2/L4 Management agent along with 2 built in Gigabit combo ports (RJ-45/SFP) and SFP ports that support SX, LX and ZX transceivers. The fiber transceiver ports can provide direct connection to your ISP with fiber optic cable.
TECHNICAL SPECIFICATIONS
PORTS
? 2 x RJ-21 Ports (contains 16 Extended
Ethernet Ports)
? 2 x Gigabit combo ports (RJ-45/SFP)
? 1 x 100BASE-T Management Port
NETWORK INTERFACE
? Ethernet Expansion:
? 10BASE-T: RJ-45 UTP category 3, 4, 5
? 100BASE-TX: RJ-45 UTP category 5
? 100BASE-FX: MMF SC/ST connector
? 1000BASE-T: RJ-45 connector
? 1000BASE-SX: MMF SC/LC connector;
62.5/125 or 50/125 microns
? 1000BASE-LX: SMF SC/LC connector;
9/125 microns
? Extended Ethernet:
? 10BASE-S: RJ-21; one-pair category 1, 2,
or 3 UTP cabling
EXTENDED ETHERNET SPECIFICATIONS
? VDSL2 Standards: supports evolving ETSI,
ANSI and ITU standards
? Modulation: 4 to 256 QAM Frequency
Division Duplexing
SPEED/DISTANCE
? Up to 100Mbps symmetrical transmission rate
at 656 ft / 200m distance
? Up to 50 Mbps symmetrical transmission
rate at 4000 ft/ 1200m distance
? Up to 15 Mbps symmetrical transmission
rate at 5000 ft/ 1500m distance
LEDs
? System: Power, Fault, Diag
? Uplink Ports : E , 0
? VDSL2 Ports : Link/Activity
? Management Port : Mgmt
SWITCHING DATABASE
? 8K MAC address entries
BUFFER ARCHITECTURE
? 16Mb shared
MTBF
SWITCH FEATURES
? Spanning Tree Protocol
? Forwarding Mode: Store-and-forward
? Full Duplex Flow Control, Half Duplex
Back Pressure
? VLAN Support: Up to 256 groups with GVRP;
port-based or with 802.1Q VLAN tagging
? Quality of Service; supports four levels of
priority and WRRQ
? MultiLink Trunking (LACP)
? Port Mirroring
? IGMP Multicast Filtering
? RADIUS Client
? Rate Limiting
MANAGEMENT FEATURES
? In-band: Telnet, SSHv2, HTTP, HTTPS or
SNMP Manager including SNMPv3
? Out-of-band: RS232 DB9 console port
? Software Loading: TFTP (in-band)
,
Xmodem (out-of-band)
? RMON Support: Groups 1, 2, 3,
9
(statistics, history, alarm, event)
STANDARD
? IEEE802.3 Ethernet, IEEE802.3u Fast
Ethernet, IEEE802.3ab/z Gigabit Ethernet,
IEEE802.3x Flow Control
? IEEE802.1D IEEE802.1w Rapid Spanning Tree,
IEEE802.1p Priority Tags, IEEE802.1Q VLAN,
IEEE802.1ac VLAN Tagging, IEEE802.1ad Link
Aggregation
TEMPERATURE
? Operating: 32
|
