Theratech Dual Channel T.E.N.S. Unit -
Transcutaneous Electrical Nerve Stimulation - LCD
Channel: Dual
Pulse Amplitude: Adjustable, 0-80mA peak into 500 ohm load each channel, constant current
Pulse Rate: 1Hz - 160Hz (adjustable),
1Hz/step (1-20Hz). 5Hz/step (20-60Hz)
Pulse Width: 50-260µ s adjustable 10* s/step
Wave Form: Asymmetrical Bi-Phasic square pulse
Timer: 15, 30 60 minutes, selectable LCD To show mode, pulse rate, pulse width, timer and channel.
Function Modes:
B: Cycle Bust. 2 burst/sec., 9 pulses/bursts. 100Hz, width adjustable
C: Continuous mode. Pulse rate, pulse width and intensity are adjustable
M: Modulated width. Pulse width will vary automatically in 6-second intervals
SDR: Strength-Duration and Rate modulation
SDR consists of alternating modulated intensity (amplitude) and pulse rate so that one parameter is always increasing while the other is decreasing and vice-versa The stimulation intensity decreases 20% from the intensity control setting and returns to the setting value; the pulse rate increases 45% from the modulated rate to the setting value and returns to the original rate. Total cycle time is 6 seconds. Rate, Width, and Intensity are adjustable.
SDW: Strength Duration and Width modulation
SWR consists of alternating modulated intensity (amplitude) and pulse width so that one parameter is always increasing while the other is decreasing and vice-versa The stimulation intensity decreases 20% from the intensity control setting and returns to the setting value; the pulse width increases 54% from the modulated width to the setting value and returns to the original width. Total cycle time is 6 seconds. Rate, Width, and Intensity are adjustable.
Battery: 9 volt
Note: This unit does not ship with electrodes. Please check for compatible electrodes below.
|
