Honeywell C7262A1008 Wall mounted Non-dispersive Infrared (NDIR) Carbon Dioxide/ Temperature Sensor with LCD Display and Honeywell logo. The C7262 sensor is a stand-alone carbon dioxide (CO2) and temperature sensor for use in controlling room ventilation and temperature. These new CO2 sensors now offer on board 20K ohm temperature sensing, which reduces the number of devices needed on the wall. The existing C7232 and C7632 families of CO2 sensors will continue to remain an important part of the Honeywell CO2 portfolio.
Features:
Used for CO2 based ventilation control
Non-Dispersion-Infrared (NDIR) technology used to measure carbon dioxide gas
Integral 20K ohm output
Available with LCD that displays the CO2 sensor ppm level
Provides two selectable CO2 outputs. Each output can be configured for either voltage (0/2-10Vdc) or current (4-20mA)
Adjustable 0-2000 ppm, 500-1500 ppm, 0-1500 ppm, or 500-2000 ppm range
Both models offer one spst ouput, settable for 800 ppm, 1000 ppm or 1200 ppm
Automatic Background Calibration (ABC) algorithm based on long-term evaluation reduces required typical zero-drift check maintenance
Cost/Time Savings: Save your customers money by reducing installation time when installing a single device rather than separate CO2 and temperature sensors
Updated Look: The C7262A adopts the same design as our top selling TR20 Series Temperature Sensors, providing aesthetic consistency in new installations and retrofits
Convenience: The LCD model shows the CO2 ppm level for quick access to information
Multiple Applications: Two models cover virtually all wall mount needs for CO2 sensing
Product Specifications:
Description: Carbon Dioxide and Temperature Sensor, Non-dispersive infrared
Mounting: Wall mount
Display: Yes
Carbon Dioxide Range: 0 to 2000 ppm, adjustable
Analog Current Output: 0/2 - 10 Vdc or 0/4 - 20 mA selectable, w/ one relay output
Relay Output - One: Normally Open SPST
Electrical Connections: Six leadwires, 20-gauge, 8 in. long
Voltage: 24 Vac/dc ±20%,
Frequency: 60 Hz
Frequency: 50 Hz
Temperature Sensor Range (F): 50 F to 100 F
Operating Temperature Range (F): 32 F to 122 F
Operating Temperature Range (C): 0 C to 50 C
Timing (response): 1 minute
Sensor Type: Non-dispersive Infrared (NDIR)
Accuracy: ± (30 ppm + 2% of reading)
Dimensions (in.): 4 9/16 in. high x 3 in. wide x 7/8 in. deep
Dimensions (mm): 116 mm high x 76 mm wide x 22 mm deep
