Mini alarm OVR camera is designed for the deficiency of present surveillance
It integrate surveillance, record with alarm functions, which is the first design
in the world.
It combining the PIR detection with Motion detection, the alarm reliability
can be greatly improved.
Built-in 1/3" SONY CCO camera with high resolution, JPG taking photos andAVI
recording function optional, making the image clear and more actvity.
Support 2G SD card, making the recording and storage time longer.
Night-vision function makes the product use in dark conditions.
Work in alarm system
Internal 1/3" SONY CCO camera makes pictures clear
PIR detective & motion detective, working steadily
Connect with a mini siren
AVI recording and JPG snap optional, when someone intrude, it will start recording/snap
Start overwriting when memory is full
Internal 32MB memory, support 2G SO card
Internal lithium battary
Real time clock record the time for every video/picture
Switch mode for PAL/NTSC
Review the video and browse pictures via monitor or TV
Night vision, using in dark condition
Power Led:Off light when it on lock, light on when it recharge in staus of power
Working Led:Flashing when it start recording, light off when it ON Lock
Alarm output:output 5v power when it's alarm, can connect with siren or other
Power switch:Switch on/off
Power jack:5v / 1.5A AC adapter, inside-anode outside-cathode
SD slot:Can insert 2G SD card
Mode select:set up the detection mode by slip stitch(motion detection, PIR detection,
motion detection + PIR detection)
Fresnel Lens:Focus IP signal, Remote control window
IR leds:Night vision
CDS:When light is low, will start the IR lights for night vision
Power supply:DC 5V
AV Out impedance:75 Ohm
AV Out volt:1Vp-p
TV Mode:PAL /NTSC
Internal camera:SONY 1/3 CCD
Trigger for record:Motion detection
Trigger for alarm:Motion detection + PIR detection
PIR detection distance Maximum 8M
View angle Maximum 120 degree
Record Frame:PAL:10 f/s NTSC:10 f/s (have 5f/s made for order)
AVI Resolution:320 x 240
JPEG resolution:640 x 480
Horizontal resolution:420 TV Line
Memory:Flash memory and SD Card
SD card capacity:2G byte
Alarm chip:Fixed code:PT2262 / Study code:SC1527
Surge resistance:4.7M Ohm
Data code:D1 low, D2 high, D3 empty, D4 empty
Batery recharge: >6 hours
Battery distance:>3 hours
AC adapter:AC/110-240v, 50-60HZ, DC5V, 1.5A
RC distance: Maximum 8M
2g SD card using time:Common conditions:AVI video recording for 3-5 days snapshot
Approved: CE / FCC
5V 1.5A Power supply
1.Put bracket on the back of DVR.
2.Connect monitor / TV via video cable adjust camera face to the surveillance
3.Select detect mode according to actually condtion.
4.Set detect area according to actually condition.
5.Please code before combine use camera with alarm host.Press "ALARM"
button on remote controller.or shake your hands in front of camera after 15
seconds you set it on lock.
6.ALARM hole out put 5 Voltage.it can connect with a mini siren.and it can control
other equipment also.