S/W Kamera 380L. Ohne Objektiv
Superior Picture Quality All three of these cameras incorporate a 1/3-inch IT (Interline Transfer) Hyper HAD CCD with more than 290,000 effective picture elements and a horizontal resolution of 380 TV lines. Sony Hyper HAD technology allows very high sensitivity with a minimum illumination of 0.1 lx at F1.2 (50 IRE), producing clear, crisp images. CCD IRIS Function This function allows the use of a manual iris lens instead of a more costly automatic iris lens. As the illumination level of the scene changes, these cameras respond by automatically reducing or increasing the exposure time of the photosensors. This is achieved by changing the electronic shutter speed of the CCD, in the range of 1/50 of a second to 1/100,000 of a second. Flexible Choice of Auto Iris Lens An auto iris lens is often ideal for shooting in environments where illumination levels vary greatly, such as outdoors. The SPT-M128CE, SPT-M124CE and SPT-M122CE cameras accept both DC servo and Video servo auto iris lenses. The auto iris lens 4-pin connector is conveniently located on the side of the camera. Backlight Compensation Function Strong backlighting can often cause the subject of the picture to be cast into shadow. The analogue Backlight Compensation (BLC) function helps to overcome this problem. In all three camera models, picture brightness can be adjusted automatically to allow for changes in lighting conditions. The rear panel LEVEL and BLC controls also make it possible to manually adjust the range of the backlight compensation function to optimize the image under very adverse lighting conditions. AC Line Lock Capability (SPT-M128CE and SPT-M124CE) The SPT-M128CE and SPT-M124CE feature external sync with an AC line lock. This makes camera installation and synchronization easy for both new and existing camera systems. The AC power frequency (50 Hz) is used as the vertical sync reference of the camera and there is an externally adjustable Vertical-Phase (+/90°) control. This feature is used in multicamera installations where automatic switching is employed, and allows for easy roll-free switching from camera to camera. Low Power Consumption All three cameras have significantly lower power consumption than earlier models: C/CS-mount Lens Compatibility All three cameras can be used with C-mount or CS-mount lenses, and precise back-focus adjustment can be easily accomplished. This broadens your choice of lenses. Features Model Power Source Synchronization SPT-M128CE: 220 V 240 V AC AC line lock (50 Hz) SPT-M124CE: 24 V AC AC line lock (50 Hz) SPT-M122CE: 12 V DC Internal Model Power Requirements Power Consumption SPT-M128CE: 220 V 240 V AC, 50 Hz 3.5 W SPT-M124CE: 24 V AC, 50 Hz 2.5 WSPT-M122CE: 12 V DC 2.4 W (0.2 A)
|
WillyFogg.com doesn't sell any of the products listed on our site.
To buy a product you need to use the link provided and visit the seller's site.
|