Water Injection System, Stage 1, Carburetor/EFI, Naturally Aspirated Engines with High or Low Compression with or without Nitrous , Kit
Chemical intercooling for the most power for your Mustang!Naturally aspirated/high compression engines: In this application, water/methanol injection allows the use of pump fuel in all but the most extreme situations which effects tremendous cost savings as well as horsepower increases due to air density increase and realized timing potential. The system is activated by a throttle switch so that injection takes place only during high engine loads when needed. NOS engines: With NOS, water/methanol injection allows the use of full timing even with large (250HP+) quantities. Injection is controlled by the same means that controls NOS injection.Naturally aspirated/stock compression: With naturally aspirated engines with less than 10:1 compression, water/methanol is used typically in warm climates to get the intake temps back to 60°f. Benefits include: 10-15 HP increases from air density increases and full timing, Increased gas mileage, and carbon free combustion chambers. Activation is by a throttle switch adjusted for onset engine load. With this application, the nozzle is sized so that no more than 10% of total fuel consumption at peak flywheel HP is injected. Systems include:* 140 psi high-volume pump* Adjustable boost pressure switch* 2 qt. reservoir* Two nozzles.* All the electrical parts* Fittings, tubing, etc. for installation.
NOTES:
Dual nozzle upgrade kit required for dual throttle body and carburetor applications. 7 qt. reservoir upgrade recommended for road racing applications.
FOR MORE INFO, HISTORY, AND F.A.Q.'s PLEASE GOTO:
http://www.fastmustangparts.com/pages.php/page/snow_performance
FREE SHIPPING within the 48 States.
|
