The practical choice for bedrooms
Features and Benefits Oversized high temperature limit switch with full length capillary sensor tube
Durable steel sheathed element with a lifetime warranty
Easy installation with pre-punched case at 1 intervals
Rugged steel construction
White or almond powder coat paint for a durable finish
Lifetime Element Warranty
Color: White
Watts 240V: 350
Watts 208V: 262
Amps 240V: 1.46
Amps 208V: 1.26
Weight: 5 LBS
General Information: The electric baseboard heater uses convection to circulate air. By superior design and proper placement under a window area, the electric baseboard case causes air to flow naturally. The cold air falls from the window area as the warm air rises from the heater, causing the air to tumble gently throughout the room. The electric baseboard heater is the number one choice for low cost installation, and the quiet operation makes it the preferred heater for bedrooms. Cadet recommends a wall-mounted thermostat for optimum performance, or you may prefer the convenience of an optional field mount thermostat kit.
Architectural Information: Electric baseboard heaters shall be UL Listed, factory rated at 120V, 208V, and dual rated from 208V to 240V. Element shall be steel sheathed calrod element with channel shaped aluminum fins. A full length capillary sensor tube shall be an integral part of each unit. Case, cover, and deflector shall be made of 24 gauge steel with 20 gauge junction box containing a grounding pigtail. All metal pieces shall be finished with a powder coat paint system.
Technical Information: Baseboard heaters work best when placed under a window and at least 1' from furniture or other objects. Keep at least 12" minimum from objects hanging above (i.e., drapes). Do not install below electrical outlets.
The electric baseboard heater may be placed directly on the floor and mounted to the wall. There are only a few exceptions listed in the installation instructions.
An optional Cadet MTX mounting tool is helpful for installing the heater. Originally designed for mounting baseboard heaters, its applications are unlimited.
Ordering Information: Standard voltage is 240/208 unless otherwise indicated. All Cadet baseboard heaters require a thermostat. For optimum comfort use a Cadet electronic thermostat or a dual diaphragm thermostat. Color of choice determined by adding an "A" (Almond) or a "W" (White) at the end of the model number (i.e., 6F1500A). See back of catalog for ordering info.
Accessories A matching single pole (BTF1) or double pole (BTF2) bimetal thermostat is available to install into either end of the baseboard heater. Since an electrical outlet may not be installed above a heater (National Electric Code), use a Cadet BRF12 duplex outlet in either end of the baseboard to meet local building codes. To switch between the Cadet baseboard heater and a cooling unit, the LTF240 can be utilized. Inside corner connectors are available to fit various designs, such as corner window areas.
Grill or Product Dimensions: 6.75"H x 2.5"D x Length Varies
|