IAR KickStart Kit Standard for LPC2129E contains all the necessary hardware and software and allows you to develop and test your applications:
- LPC2129E development board
- 20-state version of visualSTATE
- IAR Embedded Workbench with a 32KB version of the ARM C/C++ compiler
LPC2129E Development board
- MCU: LPC2129 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 2x CAN, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
- CS8900 Ethernet interface
- Two general purpose buttons
- Potentiometer connected to analog input 0
- Dallas i-button interface
- 24LC515 EEPROM for external web storage
- Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
- Single power supply: +5VDC required
- Three LAN status LEDs, three general purpose status LEDs
- Power supply filtering capacitor
- USB to RS232 interface
- RESET circuit with external control of Philips ISP utility via USB/RS232
- RESET button
- DBG jumper for JTAG enable
- BSL jumper for bootloader enable
- JRST jumper for enable/disable external RESET vontrol by RS232
- 14.7456 Mhz crystal
- Extension header for all uC ports
- PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
- RoHS compliant
- Dimensions: 80x90 mm (3.15x3.55")
Purchase the Plus version instead for JTAG debugging via the J-Link interface (not included in this Standard version)
|