StarterKit-3 including TRITON-270
The Starter-Kit 3 is a ready-to-use development system for building applications based on the TRITON-PXA270 embedded processor board.
TRITON-270 ultra-low-power miniature SBC
- TRITON-270/520/64S/32F/E85 module
- 520MHz Marvell PXA270 Processor
- 64MBytes SDRAM
- 32MBytes Intel P30 Flash
- DIMM200 Connector
- Dimensions 67.6 x 31mm
- RedBoot preinstalled
Base Board
- DIMM200 TRITON socket
- Compact Flash type II socket, selectable true-IDE or CF mode
- SD/MMC-card socket
- 3x RS232 on 10pin flat cable headers
- USB-Device connector
- USB-Host connector
- D-SUB 15 VGA connector
- UCB1400 audio codec & touchscreen controller
- 2x 3.5mm audio connectors (stereo line in, headphone)
- JTAG interface
- All pins of the TRITON socket are connected to flat cable headers
- daughter board slot for easy application design-in
- 10/100 Mbit/s Ethernet (LAN91C111)
- 3.3V single supply design, 5V also available onboard
- Operating Voltage Range: 8-24VDC
- Transient protected for automotive applications
- 100mm x 160mm, overall height 17mm
- Schematics of the base board are included for reference.
BSP Installation Options:
- RedBoot
All modules come pre-installed with RedBoot bootloader which also allows loading RAM/Flash over ethernet using tftp, or xmodem over serial.
- Linux 2.6
Our engineers will install a custom Linux Kernel 2.6.17 build and file system into the module, which supports the board and starterkit's specific functions. The source codes are provided free on the StarterKit CD.
- Windows CE 5.0
Our engineers will install a custom Windows CE 5.0 Kernel build object code and file system into the module, which supports the board and starterkit's specific functions. If you also require the source codes then please contact us for pricing.
- Windows Embedded CE 6.0
Our engineers will install a custom Windows Embedded CE 6.0 Kernel build object code and file system into the module, which supports the board and starterkit's specific functions. These object codes are not included in the Starterkit as standard, so this option also includes their purchase. If you also require the source codes then please contact us for pricing.
|
WillyFogg.com doesn't sell any of the products listed on our site.
To buy a product you need to use the link provided and visit the seller's site.
|