5 % bei Vorkasse! With its super efficient Class-BD circuit topology, the P1000-1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease. 12dB/octave crossover 4 Gauge power/ground terminals Audiophile grade speaker connections MOSFET output stage MOSFET power supply Top Mounted LED Indicators Description Value CEA-2006 Compliant Yes Number of Channels 1 Rated Power continuous power 250W x 1 @ 4-Ohms RMS 500W x 1 @ 2-Ohms RMS 1000W x 1 @ 1-Ohm RMS Total Power total sum of 'rated power' 1000 Watts Bridgeable No Efficiency (average) 86% @ 4-Ohm 84% @ 2-Ohm 76% @ 1-Ohm Crossover Controls Low-Pass (LP): 35-250Hz 12dB/octave Butterworth Tone Controls Punch EQ2 Bass: 0dB to +18dB @ 45Hz Infrasonic Filter: Selectable 12dB/Octave, -3dB @ 28Hz Signal Input Low level: 1 RCA pair Signal Output Low level: 1 RCA pair Power Input Connector Block Power Wire Gauge 4 AWG Speaker Output Connector Screw terminal barrier strip Speaker Wire Gauge 8 AWG to 18 AWG Heat Sink Type Cast aluminum Cooling Convection Remote Controls Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2) Visual Indicators Power Thermal Protect Circuit Topology Class Class bd Frequency Response 20Hz to 250Hz +/- 1.0dB Shipping Weight 10.38 Lbs. (4.70 Kg.) Dimensions (HxWxL) 2.25 x 7.625 x 14.375 (in) 5.71 x 19.37 x 36.50 (cm)
