5 % bei Vorkasse! The P300-1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot. 12dB/octave crossover 4 Gauge power/ground terminals Audiophile grade speaker connections MOSFET output stage MOSFET power supply Top Mounted LED Indicators Description Value CEA-2006 Compliant Yes Number of Channels 1 Rated Power continuous power 150W x 1 @ 4-Ohms RMS 300W x 1 @ 2-Ohms RMS Total Power total sum of 'rated power' 300 Watts Dynamic Power powercube measurement 240 Watts x 1 @ 4-Ohms 0 Res 404 Watts x 1 @ 2-Ohms 0 Res Bridgeable No Efficiency (average) 69% @ 4-Ohm 65% @ 2-Ohm Crossover Controls High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth Low-Pass (LP): 50-500Hz 12dB/octave Butterworth Tone Controls Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz Function depends upon LP/AP/HP switch position Signal Input Low level: 1 RCA pair Signal Output n/a Power Input Connector Block Power Wire Gauge 4 AWG Speaker Output Connector Screw terminal barrier strip Speaker Wire Gauge 8 AWG to 18 AWG Heat Sink Type Cast aluminum Cooling Convection Remote Controls Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2) Visual Indicators Power Thermal Protect Circuit Topology Class Class A/B Frequency Response 20Hz to 20kHz +/- 1.0dB Shipping Weight 6.34 Lbs. (2.87 Kg.) Dimensions (HxWxL) 2.25 x 7.625 x 9.0 (in) 5.71 x 19.37 x 22.80 (cm)
