Description: The kit contains all required parts for repair of the upper door and lower hinges to regain the original structural integrity. The advantage to this kit is that you do not have to remove the old hinges, or adjust door alignment. All you need to do is remove the old worn pins and bushings and install the kit (typically no more than a two hour job). Each kit will repair one ThirdGen (1982-92) F-Body door. These same kits will repair the upper and lower hinges of 1993-2002 F-Body. Two kits are required to repair the upper and lower hinges of a 4th Gen F-Body door.
Kit Contents: (2) Shouldered machined 4041 steel pins, (2) Machined Phosphor Bronze flanged bushings, (2) Aerospace 12 point high tensile nuts, 0.5ml packet of Loctite 271 bearing retaining adhesive, 6" strip of special abrasive, lower hinge pin and bushings, instructions..
Recommended Tooling:
TDS 301120 GM Door Hinge Spring Tool. The tool helps to remove or install the lower door hinge spring
TDS 303120 5 Pc. Long Pin-Punch Set. This tool helps to push out the upper hinge pins once you've ground off the heads
TDS 502270 Door hinge "Pin Popper" helps to drive out the lower hinge pin
TDS 604040 Bushing Tool helps to remove the old lower bushings and align and install the new ones.
|