The Universal Module contains an isolated contact relay and a piezo sounder. These can be operated as a beeper only, as an isolated contact relay only, or both. It can also be configured for momentary or continuous operation of the sounder and/or isolated contact relay. The isolated relay contacts are rated for 5A/24VDC.
When set for continuous operation the relay contacts close and/or the module beeps continuously when an X10 "ON" command is received. When an "OFF" command is received, the relay contacts open and/or the beeps stop.
When set for momentary operation the relay contacts close and/or the beeper gives three or four beeps when an "ON" command is received. The relay contacts then open automatically after about a second and/or the beeper stops automatically after three or four beeps. In this mode, "OFF" commands are ignored.
The module has a Test (On) button and a Unit Off button.
APPLICATIONS
- As a sounder, the Universal Module can be set to give continuous beeps and can be used as a wake-up alarm when set to turn on from any X10 Timer.
- It can be set for momentary beeps and could be used as an annunciator - such as a door entry announcer.
- Turn it on from any X10-compatible motion detector to announce that someone has approached your front door.
- When used as an isolated contact relay module, it can be used for a moment of sustained contact closure. This can be used to operate drapery controls, window openers, garage door openers, gate operators, etc.
- Switch low voltage circuits. For example, use it to activate a 24V sprinkler system, a thermostat or anything which is operated by low voltage. This product was added to our catalog on Wednesday 25 February, 2004. Customers who bought this product also purchased
|
