Untitled Document
Tamiya #58318 - Tamiya 1/10 RC 4WD High Performance Mercedes-Benz CLK-DTM (TT-01)
This is the 1/10 scale electric powered, radio controlled, four wheel drive, Tamiya Mercedes CLK-DTM, on-road, car kit.
_
FEATURES:
Chassis: Plastic tub TT-01 design
Drive: Four wheel shaft drive
Motor: 540 motor with pre-attached leads
Plastic and metal bushings
Shocks: Friction, plastic body
Gearbox: Open, front and rear
Differentials: Planetary gear
Transmission: Single speed
Tires: 2.6" (65mm) outer diameter, racing radial type
Wheels: Eighteen spoke, 2" (51mm) outer diameter, silver
Speed Control: Mechanical, standard connectors
Bumpers: Foam front bumper
Suspension: Fixed non-adjustable
Camber Tie Rods: Fixed non-adjustable, 3 part
(Camber is how the tires sit vertically)
Steering Tie Rods: fixed non-adjustable
(Caster/Toe-in is how the tires point inward as viewed from above)
Steering: bell-crank type
Servo Saver: included
INCLUDES: Enzo Ferrari rolling chassis with friction type shocks, 540 motor, mechanical speed control, clear body, tires, foam bumper, spoke wheels, 19 tooth pinion gear, 61 tooth spur gear, decal sheet and instructions.
_
REQUIRES: Radio: 2-channel with 2 standard servos
Radio Batteries: 8 AA size
Battery: 6 flat pack with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Paint: Paint for a lexan body
Misc. Items: building and track equipment
SPECS: VEHICLE-
Length: 18" (457mm)
Width: 7.9" (202mm)
Height: 4.3" (110mm)
Weight: 2.2lbs (990g) kit only
3.3lbs (1490g) with battery, speed control, motor and
radio equipment
Wheelbase: 10.1" (257mm)
Tread: Front- 6.3" (159mm)
Rear- 6.2" (157mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)
Gear Ratio: 8.35:1
Tires- Width: 1" (26mm) Wheels- Width: 1" (26mm)
Inner Diameter: 1.8" (46mm) Diameter: 1.9" (47.5mm)
Outer Diameter: 2.6" (65mm)
BODY-
Length: 18-2/8" (460mm)
Width: 7-1/2" (190mm) at rear wheels (widest point)
Height: 4-1/4" (110mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
12 5 x11mm front & rear diff gears, hubs
4 8 X12mm front & rear diff gears
?
|
