Tamiya #58280 - Tamiya TXT-1 TAMIYA XTREME TRUCK
This is the 1/10th Scale Electric Powered, Radio Controlled, 4WD TXT-1 (Tamiya Xtreme Truck) Monster Off Road Truck Kit. Before developing this vehicle, Tamiya designers attended full-scale monster truck events in the US to photograph the chassis, suspensions and drivetrains of real monster trucks. This research has resulted in a 1/10th scale monster truck with a very high level of quality, life-like realism and pure performance.
FEATURES:
Chassis: Ladder type 6mm thick machined aluminum.
Drive: Four wheel shaft driven.
Motor: Two Mabuchi 540s.
Ball bearings: included, bushings are also included throughout kit
Shocks: Oil-filled, high volume coil over with cantilever push rod design. This feature allows the shocks to provide long travel to
enable the axles to clear the most extreme angles.
Gearbox: One closed center gearbox with additional bracing that acts as a heat sink and an integral stress member for the chassis.
Differentials: planetary gear.
Transmission: single-speed.
Tires: Split V treaded rubber 4.2" x 6.5" (106mm x 165mm).
Wheels: Chrome finished plastic, one piece 2.6" x 3.7" (66mm x 94mm).
Speed Control: Mechanical, three speed forward, one speed reverse.
Bumpers: Front and rear nylon reinforced.
Suspension: Four link solid axle, adjustable. Suspension links are made of high quality aluminum tubing with plastic ball cup ends
for fully articulated movement. Front and rear stabilizer bars reduce chassis roll.
Camber Tie Rods: Dual, adjustable
(Camber is how the tires sit vertically)
Steering Tie Rods: adjustable.
(Caster/Toe-in is how the tires point inward as viewed from above)
Steering: Dual tie rod system.
Four wheel steering is available by installing 2 way connector (included) and high torque servo (must purchase separately).
Body: Pre-painted and trimmed. Most of hood is Yellow changing to a deep Blue over the rest of the vehicle with a White lightning bolt pattern on the top and sides. A spare untrimmed transparent body is also included for the modeler who wants to create his own paint scheme. Both bodies are extended cab pickup truck style.
Servo Saver: included, high torque.
INCLUDES:
One Tamiya TXT-1 4WD Off-Road Electric Powered Monster Truck with oil filled, coil over shocks, two RS-540 high-torque motors, 3 speed mechanical speed control, clear body and painted body, 4.2" x 6.5" (106mm x 165mm) tires, 2.6" x 3.7" (66mm x 94mm) chrome plated plastic wheels, 15 tooth pinion gears, 40 tooth spur gear, instructions, decal sheet, antenna tube, shock oil.
REQUIRES:
Radio: 2-Channel with one standard servo and one high torque servo for steering. Additional high torque servo and Y-harness required for optional rear steering.
Radio Batteries: Eight AA size.
Battery: 6-cell flat with standard connector, 7 cell will not fit.
Charger: AC/DC timed or peak for 6-cell battery
Paint: Polycarbonate for spare body
Misc. Items: Building and track equipment
SPECS:
VEHICLE-
Length: 20.07" (510mm)
Width: 15.15" (385mm)
Height: 11.69" (297mm)
Weight: 11.04lbs (5010g)(approx.) with radio equipment
9.8lbs (4445g)(approx.) without radio equipment
Wheelbase: 13" (330mm)
Tread: Front & Rear-11.02" (280mm) side-to-side at wheel centers
Track: Front & Rear 14.92" (379mm) side-to-side at outer edges of wheels
Ground Clearance: 1.92" (49mm)
Gear Ratio: 34:1
Tires- Front and Rear: 4.2" x 6.5" (106mm x 165mm)
BODIES-
Length: 18.25" (463mm)
Width: 7.36" (187mm) behind front wheels and at rear wheels
Height: 5.12" (130mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
(1) 6mm x 11mm gear assembly
(1) 5mm x 8mm gear assembly
(3) 5mm x 11mm gear assembly
(1) 6mm x 11mm gearbox
(1) 5mm x 8mm pinion gear
(1) 5mm x 11mm pinion gear
(8) 5mm x 8mm frame assembly
(4) 6mm x 11mm drive bevel gear shaft
(6) 5mm x 11mm drive bevel gear shaft
(2) 5mm x 8mm drive bevel gear shaft
(8) 6mm x 12mm drive shaft
(8) 6mm x 12mm upright assembly
|
