After light, current is the most important parameter in a marine aquarium. Conventional aquarium pumps generate excessively high flow rates in the core area of the water jet, but on the outside of the core area the current is too low. This difference leads to stress for the aquarium inhabitants, such as coral polyps.
TUNZE® research sets new standards in current patterns with the aim of reproducing every zone of a coral reef in the aquarium:
Our new Turbelle® stream pumps produce gentle current speeds at high flow rates of up to 12,000 litres (3,170 US gal.) per hour. These pumps are not suitable as filter pumps.
A universal holding device for horizontal and vertical attachment on glass panes of up to 19 mm (.74 in.) in thickness is included in the consignment.
Circulation pump, not controllable
Turbelle® stream 6060
For aquariums of 250 - 800 l (66 - 211 US gal.)
Output: 6000 l/h, (1,585 US gal./h)
Pump wattage: 11W
Cable length: 2 m; (78.7 in.)
Dimensions: ø 98 x 118 mm; (diam. 3.9 x 4.6 in.)
Outlet diam.: ø 50 / 47 mm; (diam. 1.9 / 1.8 in.)
-Magnetic rotors running on aqueous film bearings for low-maintenance and noiseless operation
-Quiet and easy to maintain
-Little motor heat, high efficiency
-Gentle current speeds at high flow rates
-Safety technology: Turbelle® stream 6080/6060 is earthed (3-pole plug) and has been provided with an isolating thermostat
-Controllable speed, wave simulation, tidal currents at Turbelle® stream 6000 / 6100
-Safety extra-low voltage, blocking and run-dry protection at Turbelle® stream 6000 / 6100
|
