|
Eagle Diamond Control Board
Operators are UL325 and UL991 Compliant
Every Eagle Operator ships with the new Diamond Control Board. This board has many unique and advanced features, and they all come standard!
The Eagle-Power Series ... /Off Switch for easily accessible power disconnect to allow easy installation and service.
- Universal circuit board works with most gate operators
Details...
|
|
USD 475.00
Texas Security Gates - traffic controllers ...
|
|
Elite Robo Control Board
Elite Circuit Board
Robo Series
Control Board
|
|
USD 425.00
Texas Security Gates - traffic controllers ...
|
|
Miracle One Control Board
New Miracle One Control Board
|
|
USD 399.00
Texas Security Gates - traffic controllers ...
|
|
2510-244 Control Board - Single Phase (Includes Motor Board)
... Single Phase Control Board for OSCO Gate Operators
This board will replace the control board in OSCO Single Phase Gate Operators.
It includes both the main control board and the piggy back motor board.
It may be necessary ...
|
|
USD 471.82
Protec Controls
|
|
2510-247 Control Board - DC (Includes DC Motor Board)
... the main control board and the piggy back motor board.
It may be necessary to install the chip from your existing control board into the new board.
***There are no returns on opened OSCO control boards***
We have ...
|
|
USD 524.64
Protec Controls
|
|
E-Blocks Dual Bridge Driver Motor Control Board
... Driver Board allows the user to connect and drive two motors independently of each other. The inclusion of sense and quadrature terminals permits the user to employ feedback and positional control of ... ports with up to 8 lines per port.
Download E-Block Dual Bridge Driver Motor Control Board Datasheet (PDF file; 1470KB)
|
|
MicroController & Embedded Systems Too ...
  |
|
|
|
24 Digital I/O over Ethernet Control Board
... to any device which is connected to the internet. 24 Digital I/O over Ethernet Control Board Features
- Supports ARP, BOOTP, DHCP, ICMP and UDP/IP protocols
- Programmable, port number, subnet mask ... by router connection
- On board EEPROM allows all ports to power up in a user programmable state
- Small packet size and connectionless protocol allows real time sensing and control
- Can be connected ...
|
|
USD 170.00
MicroController & Embedded Systems Too ...
|
|
ATmega32 Motor Control Board: 2x Stepper, 4x DC Motors
... .
It can also used to control two unipolar stepper motors + 2 bipolar stepper motors at the same time.
The board has the following circuits mounted on the board:
- Stepper Motor Driver (Unipolar and ... the matching 6-pin single row ISP connector (see add-on options below). ATmega32 Motor Control Board Downloads:
- Datasheet
|
|
USD 51.00
MicroController & Embedded Systems Too ...
|
|
24 Digital I/O over USB Control Board
... USB Control Board Features
- 24 independent and programmable input/output pins that are grouped into 3 ports
- Single module high-speed digital input/output solution
- Integrated Type-B USB connector
- On-board unique ...
|
|
USD 119.00
MicroController & Embedded Systems Too ...
|
|
2510-245 Control Board - DC Operators (Includes DC Motor Board)
DC Powered Control Board for OSCO Gate Operators
This board will replace the control board in OSCO DC Powered Gate Operators.
It includes both the main control board and the piggy back motor board.
It may be necessary ...
|
|
USD 524.64
Protec Controls
|
|
2510-295 Control Board - Three Phase (Includes Motor Board)
Three Phase Control Board for OSCO Gate Operators
This board will replace the control board in OSCO Three Phase Gate Operators.
It includes both the main control board and the piggy back motor board.
It may be necessary ...
|
|
USD 513.98
Protec Controls
|
|
2510-245 Control Board - DC (Includes DC Motor Board)
... the main control board and the piggy back motor board.
It may be necessary to install the chip from your existing control board into the new board.
***There are no returns on opened OSCO control boards***
We have ...
|
|
USD 524.64
Protec Controls
|
|
|
|
GTO R4211 Replacement Control Board for SW2000XL / 3000XL / 4000XL
GTO R4211 Replacement Control Board
The GTO R4211 Replacement Control Board is for Mighty Mule FM500, FM502 also compatible with GTO PRO 2000XL, GTO PRO 3000XL, ...
Details...
|
|
USD 260.00
North Shore Commercial Door
|
|
dsPIC33FJ128MC802 Motor Control Board w/ Bootloader, XBee socket
... : TTL and CMOS 3.3V compatible
- Current sensing amplification: 10× or 1× (selectable)
dsPIC33FJ Motor Control Board Connectors Please refer to the following diagrams along with the descriptions below.
- Top pinout
- Bottom ... board is powered
- L1: User defined
- L2: User defined
- ASSOC: Used by XBee if installed. Indicates XBee ready
- RSSI: Used by XBee if installed. Flashes when signal is received
dsPIC33FJ Motor Control Board ...
|
|
MicroController & Embedded Systems Too ...
|
|
Eddie Control Board with Power Connector, for Robots
... - Operating temperature: 32 to 158 °F (0 to 70 °C)
Eddie Control Board Resources
- Eddie Control Board Schematic
- Eddie Control Board Documentation
- Eddie Firmware
- Eddie Command Set
- Microsoft Robotics Developer Studio 4 ...
|
|
MicroController & Embedded Systems Too ...
|
|
HySecurity SlideDriver Control Board Smart Touch
... SlideDriver Control Board Smart Touch
Part# MX000585
Smart Touch Control Board. Unprogrammed
Note, Program operator type and input power type when installing. When replacing classic Smart Touch Controller board, Display Board must ...
|
|
USD 813.00
Protec Controls
|
|
TouchPanel Controller Board, 4-wire FFC to 6 pins @ 0.1
... connect the board to your system. Male header pins are provided that you can solder, for typical breadboard use.
Note: This board uses 5V power supply only.
TouchPanel Controller Board Resources
- TouchPanel Controller PROTO User ...
|
|
MicroController & Embedded Systems Too ...
|
|
Genie 34019T Sequencer Excelerator Coaxial Control Board
Replacement Control Board for Genie excelerator garage door openers only
Details...
|
|
USD 56.00
North Shore Commercial Door
|
|
Challenger 109938 Garage Door Opener Motor Control Board
> Challenger 109938 Garage Door Opener Motor Control Board
Details...
|
|
USD 53.00
North Shore Commercial Door
|
|
Wayne Dalton 303 or 372 Mhz Control Board 306132
Wayne Dalton Original Replacement motor control board for Quantum and Classic Drive Openers (303 and 372 Mhz) Compatible with Quantum 3212, 3213, 3214, 3314, 3316, 3414 Classic Drive 3012, 3014, 3016, 3018, 3512, 3514.
Details...
|
|
North Shore Commercial Door
|
|
|
|
