 | 2.30mm Pinion Gear M0.5 8T~14T
1Pc.
For motor with 2.3mm shaft
Details... | | USD 2.00
Aero-nuts Your R/C model online store |
 | Pinion - 18T 2.3mm ID
A 18 tooth pinion to fit 2.3mm shaft - for use with Hyperion gearboxes.(grub screw)
Details... | | USD 1.70
GBP 1.15
Robotbirds.com |
 | Pinion - 20T 2.3mm ID
A 20 tooth pinion to fit 2.3mm shaft - for use with Hyperion gearboxes.(grub screw)
Details... | | USD 2.22
GBP 1.50
Robotbirds.com |
 | 9 Tooth pinion for a 2.3mm shaft
These pinion gears were made by Precision Model Products. They comes with a grub screw and a hex wrench to tighten the screw. They will fit the Aurora and CDROM motors using the mount sold above.
Height: 7.5mm
Max Diameter: 7.41mm
Base ...
| | USD 7.99
Dionysus Design |
 | 8 Tooth pinion for a 2.3mm shaft
These pinion gears were made by Precision Model Products. They comes with a grub screw and a hex wrench to tighten the screw. They will fit the Aurora and CDROM motors using the mount sold above.
Height: 7.5mm
Max Diameter: 7.41mm
Base ...
| | USD 7.99
Dionysus Design |
 | 10 Tooth pinion for a 2.3mm shaft
These pinion gears were made by Precision Model Products. They comes with a grub screw and a hex wrench to tighten the screw. They will fit the Aurora and CDROM motors using the mount sold above.
Height: 7.5mm
Max Diameter: 7.41mm
Base ...
| | USD 9.99
Dionysus Design |
 | 3.17mm Pinion Gear M0.5 10T~15T
1Pc.
For motor with 2.3mm shaft
Details... | | USD 2.00
Aero-nuts Your R/C model online store |
 | 8T Long Pinion for 400DH
...
Details... | | USD 4.14
SGD 6.30
RCE Hobby |
 | GWS Pinion Puller - Standard
A Standard size pinion puller from GWS for removing gears from 2.0mm, 2.3mm & 3.17mm motor shafts.
Details... | | USD 51.69
GBP 34.95
Robotbirds.com |
 | t0500.048 MOTOR PINION GEAR 10T 2,3MM réf t0500.048
| |
Pigs Airlines |
 | t0500.053 MOTOR PINION GEAR 9T 2,3MM réf t0500.053
| |
Pigs Airlines |
 | HYPERION ALUMINUM HI-WATT GEARBOX 400 - V2
... rings for APC props). The wide, glass-filled spur gear is very durable, and rated for up to 300W in large E3D models. Five 2.3mm pinion gears included, for gear ratios from 3.6 to 6.0:1. You may also use lower-tooth-count GWS EPS-400 spur gear to ...
Details... | | USD 16.95
ALL e RC - Your Hyperion Headquarters |
 | Traxxas T-Maxx 2.5 4wd RTR Nitro Monster Truck (Forward/Reverse)
...
- 4WD system with hardened steel ring and pinions; planetary gear
- differentials; slipper clutch; and new, larger, heavy-duty driveshafts.
- 8 adjustable oil-filled shocks
- Over 3 1/2 inches of suspension travel.
- Four-wheel disc ...
| | USD 339.99
A Main Hobbies |
 | HPXG300 - Brushless stick mount gear box
... , low noise, and low power losses. The shaft necks down to 3mm at the output. The wide, glass-filled spur gear is very durable, and rated for up to 300W in large E3D models. Five 2.0mm pinion gears included, for gear ratios from 3.78 to 6.8:1.
Details... | | USD 15.66
AUD 24.00
Nitrodude |
 | Hyperion Hi-Watt gearbox 400
... holes or adapters (See Hyperion precision threaded rings for APC props). The wide, glass-filled spur gear is very durable, and rated for up to 400W in large E3D models.
Five pinion gears included (2.3mm), for gear ratios from 3.6 to 6.0:1.
Details... | | USD 2.88
GBP 1.95
Robotbirds.com |
 | BRUSHLESS MOTOR 400 SIZE (0402S)
... , etc
- Maximum Current - 22A
- Efficiency - 15T upper 85%
- Max Rpm/v - 3600/v
- Dimensions - 28 x 41mm
- Shaft Size - 2.3mm (10T Brass Pinion fitted)
- Weight - 75g
- Recommended speed controller - 22 amp or above Sensorless
Details... | | USD 59.15
GBP 39.99
247 models |
 | 4:1 GEAR BOX W/4BB (400 SIZE)
- Output Shaft Size - 4mm
- Pinion Shaft Size - 2.3mm
- Gear Ratio - 4:1
- Body Length - 25mm
- Ball Bearings - 4
Details... | | USD 16.26
GBP 10.99
247 models |
 | Aurora 300DF Brushless Motor
The Aurora 300DF is the perfect size for a micro helicopter main motor. It has a RPM/Volt rating of 2250. The shaft is 2.3mm in diameter, so standard pinions will fit. We recommend using 10 and 11 tooth pinions on this motor since it is an outrunner ...
Details... | | USD 39.99
Dionysus Design |
 | Hyperion P-1919-04M-23
Hyperion P-1919-04M-23, 2.3mm shaft. Ideal for a T-Rex 450 3D set up with a 13T pinion, set Tx curve / governor for 2800~3050rpm headspeed.
P1919 motors all have 250W watts max continuous power handling capability. Note, that each has a ...
Details... | | USD 44.30
GBP 29.95
Robotbirds.com |
 | HYPERION ALUMINUM HI-WATT GEARBOX 300 - V2
... or long collet adapters. The wide, glass-filled spur gear is very durable, and rated for up to 300W in large E3D models. Five 2.0mm pinion gears included, for gear ratios from 3.78 to 6.8:1. You may also use lower-tooth-count GWS EPS-400 spur gear to ...
Details... | | USD 16.95
ALL e RC - Your Hyperion Headquarters
|
|