|
Aluminium IPS size Gearbox - B 7:1
A nicely machined aluminium gearbox with pinion to fit any IPS/LPS size motor (including the Feigao brushless motors). Weighs 14g including spinner. It also has the normal stick mount fitting on the back to accept a 10mmx5mm stick. This is the B 7:1 ratio.
Details...
|
|
Robotbirds.com
|
|
Aluminium IPS size Gearbox - D 9.67:1
A nicely machined aluminium gearbox with pinion to fit any IPS/LPS size motor (including the Feigao brushless motors). Weighs 14g including spinner. It also has the normal stick mount fitting on the back to accept a 10mmx5mm stick. This is the D 9.67:1 ratio.
Details...
|
|
USD 27.95
GBP 17.00
Robotbirds.com
|
|
Feigao 4:1 Gearbox for 130 Motor
Details...
|
|
Robotbirds.com
|
|
GWS LPS Gearbox A 4:1
Suitable for use with either GWS LPS motors or the Feigao LPS or IPS size brushless motors. 4:1 Gearbox. Gearbox Weight: 12.2g
Details...
|
|
Robotbirds.com
|
|
GWS LPS Gearbox C 6.2:1
Suitable for use with either GWS LPS motors or the Feigao LPS or IPS size brushless motors. 6.2:1 Gearbox. Gearbox Weight: 11.8g
Details...
|
|
USD 2.14
GBP 1.30
Robotbirds.com
|
|
Hyperion 3.2mm Shaft Collar
Hyperion Shaft collars (3.2mm ID) add a measure of security to any backmount installation for outrunner motors with 3.2mm shaft, such as the AXI 22 series.
Details...
|
|
USD 2.14
GBP 1.30
Robotbirds.com
|
|
|
|
Hyperion 3mm Shaft Collar
HP SHAFT COLLARS for DIY Motor assembly, Backmount security, or wheel collar duty. The Hyperion Shaft collars (3mm ID) are especially useful in DIY motor assembly, to retain one side of the motor shaft when backmounting, for instance. Also used as wheel coll ...
Details...
|
|
USD 3.70
GBP 2.25
Robotbirds.com
|
|
Hyperion Replacement Shaft for 400 Gearbox
Replacement Shaft for the Hyperion Hi-Watt 400 Gearbox.
Details...
|
|
USD 3.70
GBP 2.25
Robotbirds.com
|
|
Hyperion Replacement Steel Shaft for 400 Gearbox
STEEL SHAFT for Hyperion XG-400 Gearbox The stock aluminum shaft is super light, but this steel shaft may be better for you if you are getting prop strikes on landing. Very strong and very unlikely to bend.
Details...
|
|
USD 1.89
GBP 1.15
Robotbirds.com
|
|
2908/2915 Back mount
A backmount for the 2908 & 2915 Outrunner motors.
Details...
|
|
USD 6.49
GBP 3.95
Robotbirds.com
|
|
Aluminium Tube Mount for PJS 300-1500
Designed for easy mounting of PJS typemotors.
Details...
|
|
Robotbirds.com
|
|
Aluminium Tube Mount with 50cm Carbon Tube for PJS 300-1500
Stick carbon fuselage with mount . Total solution to quickly build an indoor model
Details...
|
|
Robotbirds.com
|
|
|
|
Aluminium Tube Mount with Carbon Tube For PJS 300-1500
As above with a 150mm length of carbon, perfect for foam models or glue to more than one one bulkhead
Details...
|
|
USD 1.64
GBP 1.00
Robotbirds.com
|
|
Bell Motor Enclosed Flange Mount
An enclosed flange/bulkhead type mount for the Bell motors. The motor is held in place in the same way as a normal flange/bulkhead type mount. The mount also covers the back of the motor giving the windings some extra protection & weighs just 6g.
Details...
|
|
USD 2.05
GBP 1.25
Robotbirds.com
|
|
Bell Motor Flange Mount
A flange/bulkhead type mount for the Bell motors. The internal diameter is 8mm.
Details...
|
|
USD 2.05
GBP 1.25
Robotbirds.com
|
|
Hyperion 20A Ultra Shunt for Emeter
Change the sensitivity & range of your Emeter down to 20amps max with readings to 0.01A accuracy.
The Emeter shunt uses Deans Ultra connectors to connect to your battery & esc. We sell these connectors individually - for one set of adaptor leads you ...
Details...
|
|
Robotbirds.com
|
|
Hyperion Receiver Battery load tester
Receiver Battery Load Tester
Details...
|
|
USD 31.23
GBP 19.00
Robotbirds.com
|
|
Driver - 6 Piece Precision Screw Driver set
6 Piece Precision Screwdriver set with stand
- 3x posi driver & 3x straight blade driver
Details...
|
|
USD 5.59
GBP 3.40
Robotbirds.com
|
|
File - Set of 10 eco Needle Files
Set of 10 Needle Files
- 10 different profiles
- Medium cut
Details...
|
|
USD 13.81
GBP 8.40
Robotbirds.com
|
|
|
|
